Table of Contents
Advertisement
Error code (hex)
Description
0x0F
Explanation: Could not allocate enough memory for other structures.
For Windows NT:
Action:
1. From the Windows NT desktop, click Start Æ Control Panel Æ Networks Æ Adapters.
2. Select an IBM Ethernet adapter from the list.
3. Click Properties Æ Advanced.
4. Lower the resource values that apply to the transmit queue.
For Windows 2000:
Action:
1. From the Windows 2000 desktop, click Start Æ Settings Æ Control Panel Æ Network and
Dial-up Connections.
2. Right-click an IBM Ethernet adapter in the list and click Properties.
3. Select a component and click Configure.
4. Click the Advanced tab and lower the resource values that apply to the transmit queue.
0x10
Explanation: Did not find any Ethernet controllers.
Action: Using the Configuration/Setup Utility program, make sure that Ethernet is enabled.
0x11
Explanation: Multiple Ethernet controllers found, but none matched the required ID.
Action: Using the Configuration/Setup Utility program, make sure that Ethernet is enabled.
0x13
Explanation: Did not find any Ethernet controllers that matched the required subven/subdev.
Action: Using the Configuration/Setup Utility program, make sure that Ethernet is enabled.
0x16
Explanation: Single adapter found, but multiple instances tried to load.
Action: Using the Configuration/Setup Utility program, make sure that Ethernet is enabled, and
that the integrated 10/100 Ethernet controller or the optional Ethernet PCI adapter are enabled.
0x17
Explanation: Slot parameter not specified in the registry.
Action: Remove the adapter driver and reinstall it.
All other
Action: See supplementary documentation, such as www.ibm.com/pc/support, for more
4-character
information.
hexadecimal
codes
Ethernet Windows NDIS teaming messages
This section explains the messages associated with Ethernet teaming.
Event ID
Type
01
Error
02
Error
Description
Explanation: Team name and physical adapter name are the same. This
is an invalid configuration.
Action: Reconfigure the adapter team by double-clicking the PROSet
icon in the Control Panel.
Explanation: Unable to allocate required resources.
Action: Free some memory resources and restart.
37
Diagnostics
Advertisement
Table of Contents
