Table of Contents
Advertisement
Error code (hex)
Description
0x03
Explanation: Failed self-test.
Action: Make sure a cable is attached to the Ethernet connector.
0x0D
Explanation: Could not allocate enough memory for transmit queues.
For Windows NT:
Action:
1. From the Windows NT desktop, click Start Æ Control Panel Æ Networks Æ Adapters.
2. Select an IBM Ethernet adapter from the list.
3. Click Properties Æ Advanced.
4. Lower the resource values that apply to the transmit queue.
For Windows 2000:
Action:
1. From the Windows 2000 desktop, click Start Æ Settings Æ Control Panel Æ Network and
Dial-up Connections.
2. Right-click an IBM Ethernet adapter in the list and click Properties.
3. Select a component and click Configure.
4. Click the Advanced tab and lower the resource values that apply to the transmit queue.
0x0E
Explanation: Could not allocate enough memory for receive queue.
For Windows NT:
Action:
1. From the Windows NT desktop, click Start Æ Control Panel Æ Networks Æ Adapters.
2. Select an IBM Ethernet adapter from the list.
3. Click Properties Æ Advanced.
4. Lower the value for the resource named in the message.
For Windows 2000:
Action:
1. From the Windows 2000 desktop, click Start Æ Settings Æ Control Panel Æ Network and
Dial-up Connections.
2. Right-click an IBM Ethernet adapter in the list and click Properties.
3. Select a component and click Configure.
4. Click the Advanced tab and lower the value for the resource named in the message.
36
IBM IntelliStation E Pro Types 6216 and 6226: Hardware Maintenance Manual
Advertisement
Table of Contents
