IBM IntelliStation E Pro Hardware Maintenance Manual page 117

Error code/symptom
162 (Device configuration error)
Note: Be sure to load the default settings
and any additional desired settings; then,
save the configuration.
163 (Real-time clock error)
164 (Memory configuration changed.)
184 (Power-on password damaged)
185 (Drive startup sequence information
corrupted)
187 (VPD serial number not set.)
188 (Bad EEPROM CRC #2)
189 (An attempt made to enter the system
with invalid passwords)
201 (Memory test error.)
289 (DIMM disabled by the user or
system.)
301 (Keyboard or keyboard controller
error)
303 (Keyboard controller error)
602 (Invalid diskette boot record)
604 (Diskette drive error)
662 (Diskette drive configuration error)
FRU/action
1. Run the Configuration/Setup Utility program.
2. Battery.
3. Failing device.
4. System board.
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Set serial number in the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
v Run the Configuration/Setup Utility program.
1. DIMM
2. System board
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
1. Keyboard
2. System board
v System board
1. Diskette
2. Diskette drive
3. Drive cable
4. System board
1. Run the Configuration/Setup Utility program and diagnostics.
2. Diskette drive.
3. Drive cable.
4. System board.
1. Run the Configuration/Setup Utility program and diagnostics.
2. Diskette drive.
3. Drive cable.
4. System board.
107
Symptom-to-FRU index