IBM IntelliStation E Pro Hardware Maintenance Manual page 19

Types 6216 and 6226
Hide thumbs Also See for IntelliStation E Pro:
Table of Contents

Advertisement

from the device, ensure that all power cords are disconnected from the power
source.
v You can press the power-control button on the front of the computer. This starts
an orderly shutdown of the operating system, if this feature is supported by the
operating system, and places the computer in Standby mode.
Note: After you turn off the computer, wait at least 5 seconds before you press
the power-control button to turn on the computer again.
v You can press and hold the power-control button for more than 4 seconds to
cause an immediate shutdown of the computer. You can use this feature if the
operating system stops functioning.
v If you cannot use the power-control button to turn off the computer, disconnect
the computer power cords from the electrical outlets.
Note: After disconnecting the power cords, wait approximately 15 seconds for
the computer to stop running.
9
General information

Advertisement

Table of Contents
loading

Table of Contents