Removing A Fuse; Replacing The Fuse; Ignition Curve; Ignition Curve Plug Connection - KTM 450 SX-F Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Removing a fuse

8.82

Replacing the fuse

8.83
Warning
Fire hazard The electrical system can be overloaded by the use of incorrect fuses.
–
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.

Ignition curve

8.84
Possible states
–
Performance - higher performance
–
Soft - better handling

Ignition curve plug connection

8.85
Possible states
–
Switch off the charger after charging. Disconnect the battery.
Rules
The charge current, charge voltage and charge time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use.:
–
Mount the seat (
–
Switch off all power-consuming components and switch off the engine.
–
Dismount the air filter box lid (
–
Remove the protection cover
Info
The fuse
–
Remove the fuse
400270-10
–
Check parts for damage and wear. Replace damaged or worn parts.
Info
A reserve fuse
Replace a burned-out fuse
–
Refit the fuse.
Fuse (75011088010)
Info
400273-10
If the new fuse burns out, contact an authorized KTM workshop.
–
Replace the protection cover.
–
Install the air filter box lid (
–
Plug connection closed
400211-10
3 months
53)
59)
.
1
is located in the starter relay
2
.
2
is located in the starter relay.
1
only by an equivalent fuse.
2
59)
under the filter box cover.
3
52