Important Maintenance Work To Be Carried Out By An Authorized Ktm Workshop. (As Additional Order); Important Checks And Maintenance Work To Be Carried Out By The Rider - KTM 450 SX-F Owner's Manual

GREASING AND SERVICE TABLE

Important maintenance work to be carried out by an authorized KTM workshop. (as additional order)

7.2
Carry out a complete fork service.
Carry out a complete shock absorber service.
Grease the steering head bearing. (
Clean and adjust carburetor.
Treat electric contacts with contact spray.
Change hydraulic clutch fluid.
Change brake fluid.
Check wear of clutch discs.
Check long clutch springs.
Check clutch slave cylinder for dents.
Check outer clutch hub for dents.
Check cylinder wear and change pistons.
Check camshaft wear. (visual check)
Check wear of valve spring seat.
Check wear of valve guides.
Change valves.
Change valve springs.
Check the timing-chain tensioner function.
Check crankshaft and crankshaft journal for run-out.
Change conrod bearing.
Check piston pin bearing.
Change the crankshaft main bearing.
Check wear of all transmission components including shafts
and bearings.
Check long bypass valve spring.
Change glass fiber yarn filling of main silencer. (
Replace foot brake cylinder seals.
Check carburetor components.

Important checks and maintenance work to be carried out by the rider.

7.3
Check the engine oil level. (
Check the front brake brake fluid level. (
Check the rear brake fluid level. (
Check the front brake linings. (
Check the rear brake linings. (
Check and adjust Bowden cables.
Bleed fork legs. ( 26)
Clean dust boots of fork legs. (
Clean the chain. ( 33)
Check the chain tension. (
Check the chain wear. ( 35)
31)
59)
63)
39)
43)
40)
44)
26)
34)
Every 10 Every 20
service hours service
/ 70 liters of hours / 140
fuel / after liters of
each race fuel
•
•
•
•
•
•
Every 40 annually
service
hours / 270
liters of
fuel
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Conditions:
For use on offroad
terrain
according to
requirements
•
•
•
•
•
•
•
•
•
•
•
18
every 2
years
•