MAINTENANCE WORK ON CHASSIS AND ENGINE
Changing glass fiber yarn filling of main silencer
8.101
–
Remove glass fiber yarn filling from main silencer. (
–
Fit glass fiber yarn filling in main silencer. (
Dismounting the air filter box lid
8.102
Installing the air filter box lid
8.103
x
Removing the air filter
8.104
Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
–
Never ride the motorcycle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
x
58)
58)
–
Pull off the air filter box lid in area
400251-10
–
Insert the air filter box lid into the rear area
400251-11
–
Dismount the air filter box lid (
–
Hang the air filter holder
air filter with the air filter support.
–
Remove the air filter from the air filter support.
500107-10
to the side and remove to the front.
A
and clip it into the front area
A
59)
out to the bottom and swing it to the side. Remove the
1
59
.
B