MAINTENANCE WORK ON CHASSIS AND ENGINE
x
Installing the fork legs
8.27
Removing the fork protector
8.28
Installing the fork protector
8.29
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Position the fork legs.
Info
The topmost sunk nut in the fork leg must be flush to the upper edge of the
upper triple clamp.
Position the bleeder screw
400248-10
–
Fully tighten screw
Rules
Screw, top triple clamp
–
Fully tighten screw
Rules
Screw, bottom triple
clamp
500094-11
–
Position brake caliper, mount and tighten screws
Rules
Screw, front brake
caliper
–
Position brake line. Put the clamp on, mount and tighten screws
–
Fit front wheel. (
500093-13
x
–
Remove the fork legs. (
–
Remove screws
–
Remove the screws on the right fork leg. Remove the fork protector upwards.
500105-10
x
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Position the fork protection on the left fork leg. Mount and tighten screws
Rules
Remaining screws, chas-
sis
–
Position the fork protection on the right fork leg. Mount and tighten screws.
Rules
Remaining screws, chas-
sis
500105-10
–
Install the fork legs. (
to the front.
1
.
2
M8
.
3
M8
M8
25 Nm
(18.44 lbf ft)
47)
28)
on the left fork leg. Remove the fork protector upwards.
1
M6
M6
29)
17 Nm (12.54 lbf ft)
12 Nm (8.85 lbf ft)
.
3
Loctite
®
243™ (
84)
.
4
.
1
10 Nm (7.38 lbf ft)
10 Nm (7.38 lbf ft)
29