MAINTENANCE WORK ON CHASSIS AND ENGINE
Changing engine oil and oil filter, cleaning oil screen
8.114
–
Drain the engine oil. (
64)
–
Remove the oil filter. (
–
Mount the oil filter. (
65)
–
Fill up with engine oil. (
x
Draining the engine oil
8.115
Warning
Danger of scalding Engine oil gets very hot when the motocycle is driven.
–
Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
Info
Drain the engine oil only when the engine is warm.
x
Cleaning the oil screen
8.116
Warning
Danger of scalding Engine oil gets very hot when the motocycle is driven.
–
Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
–
Check the engine oil level.
The engine oil reaches the bottom of the viewer
>
When the engine oil does not reach the bottom of the viewer:
–
400212-10
65)
66)
–
Stand the motorcycle on its side stand on a horizontal surface.
–
Place a suitable container under the engine.
–
Remove the oil drain plug
–
Completely drain the engine oil.
–
Thoroughly clean the oil drain plug with a magnet.
–
Clean the sealing area on the engine.
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Fit oil drain plug
Rules
400261-10
Oil drain plug with mag-
net
–
Clean the oil screen. (
–
Place a suitable container under the engine.
Top up the engine oil. (
66)
x
.
1
with seal ring and tighten it.
1
M12x1,5
64)
.
A
20 Nm (14.75 lbf ft)
64