Rear Seats; Head Restraints - KODA Citigo Owner's Manual

Folding the rear seats forward

First read and observe the introductory information given on page 42.
The rear seat backrest can be folded forwards to increase the size of the luggage
compartment.
Folding the seat backrest forwards
›
Push the release handle » Fig. 39
A
ward.
›
Move the head restraint fully towards the rear, or remove
straints.
Folding the seat backrest back into position
›
Push the head restraint into the slightly lifted seat backrest
restraints.
›
Then push the seat backrest back into the upright position until the unlocking
handle clicks into place - check by pulling on the seat backrest
›
Make sure that the red marker
B
WARNING
The belts and the belt locks must be in their original position after folding
■
back the seat backrests – they must be ready to use.
The seat backrests must be securely locked in position so that no objects in
■
the luggage compartment can slide into the passenger compartment on sud-
den braking – risk of injury.
Ensure that the rear seat backrests are properly engaged. It is only then that
■
the three-point seat belt can reliably fulfil its function.
Fig. 39
Unlock the seat backrest
to unlock the seat backrest and fold it for-
» page 43, Head re-
» page 43, Head
» .
» Fig. 39 is hidden.
CAUTION
Ensure that the seat belts are not damaged when operating the seat backrests.
Under no circumstances must the rear seat belts be jammed by the folded back
seat backrests.

Head restraints


First read and observe the introductory information given on page 42.
Only the rear head restraints can be height-adjusted or removed or installed.
Setting height
›
Grasp the side of the head restraint with both hands and push it upwards as re-
quired » Fig. 40.
›
To move the head restraint downwards, press and hold the safety button
with one hand and press the head restraint downwards with the other hand.
Removing/installing
›
Fold the seat backrest a little forward
›
Grasp the side of the head restraint with both hands and push it upwards as re-
quired.
›
Press the safety button » Fig. 40
1
use the other hand to remove the head restraint.
›
To reinstall, press the safety button
head rests as far down into the seat rests as possible until the safety button
audibly latches.
Fig. 40
Head restraints rear: adjusting/
removing
» page 43, Folding the rear seats forward.
with one hand and keep it pressed down,
and keep it pressed while moving the
1
Seats and stowing

1

43