Replacing The Bulb For The Licence Plate Light; Tail Light - KODA Citigo Owner's Manual

›
Return the expanding rivet, screw in.
›
Firmly tighten the two attachment bolts with the screwdriver.

Replacing the bulb for the licence plate light

Fig. 130 Changing the bulb for the licence plate light

First read and observe the introductory information and safety warn-
ings on page 151.
›
Insert a suitable thin object, e.g. a screwdriver into the recess in the region of
the arrow and carefully prise the number plate light out of the bumper
- .
›
Pull the number plate light out of the bumper a little.
›
Turn the bulb holder anti-clockwise and remove in the direction of the ar-
row » Fig. 130 - .
›
Remove the faulty bulb from the socket.
›
Insert a new bulb into the socket.
›
Insert the bulb holder into the number plate light and turn clockwise as far as
the stop.
›
Insert the number plate light into the opening of the bumper at the left edge.
Lightly press it until the spring latches.

Tail light


Fig. 131 Removing the tail lamp assembly
» Fig. 130
Fig. 132 Tail light assembly: Replacing bulbs

First read and observe the introductory information and safety warn-
ings on page 151.
Fold the seat rest of the rear set bench forward to make it easier to reach the
cover of the rear light more easily

Removing and installing the tail light
›
Open the luggage compartment door and unscrew the luggage compartment
cover » page 46.
›
Prise the cover
1
of the locking mechanism
mechanism at the connector
›
Press the locking mechanism
» page 43, Folding the rear seats forward.
» Fig. 131, insert the screwdriver underneath the lower edge
» page 138, Vehicle tool kit and pull the locking
3
in the direction of arrow.
2
and remove the connector
4
Fuses and light bulbs
.
2

153