WARNING
If the vehicle is locked from the outside, do not leave anybody in the vehicle
■
as it is not possible to open the windows from the inside in the event of an
emergency.
When closing the windows, proceed with caution so as to avoid causing
■
crushing injuries - risk of injury!
CAUTION
Keep the windows clean to ensure the correct functionality of the electric win-
■
dows.
If the windows are frozen, first of all remove the ice
■
exterior mirrors. Only then can the electrical power windows be operated, as oth-
erwise the window seal and the electrical power window mechanism could be
damaged.
Make sure that the windows are closed whenever you leave the locked vehicle.
■
For the sake of the environment
The windows must be kept closed at high speeds in order to prevent unnecessa-
rily high fuel consumption.
Note
The heating, air conditioning and ventilation system should be used to ventilate
the inside of the vehicle while driving. If the windows are open, dust as well as
other dirt can get into the vehicle, and there may also be wind noise at certain
speeds.
28
Using the system
» page
108, Windows and
The electrical power windows can only be operated when the ignition is switched
on.
Opening
›
Closing
›
Electric window opening/closing
First read and observe the introductory information and safety warn-
ings
on page 27.
The window is opened by pressing lightly on the corresponding button. The
opening process stops when one releases the button.
The window is closed by pulling lightly on the corresponding upper edge of the
button. The closing process stops when one releases the button.
Fig. 19
Button on the driver's door