Multifunction Display (Onboard Computer) - KODA Citigo Owner's Manual

Multifunction display (onboard computer)


Introduction
This chapter contains information on the following subjects:
Memory
Operation
Digital clock
Multifunction display details
Warning against excessive speeds
The multifunction display can only be operated when the ignition is switched on.
After the ignition is switched on, the function displayed is the one which you last
selected before switching off the ignition.
The multi-functional indicator appears in the display
WARNING
Concentrate fully at all times on your driving! As the driver you are fully re-
■
sponsible for the operation of your vehicle.
Do not only rely upon the information given on the outside temperature dis-
■
play that there is no ice on the road. Even at temperatures around +4 °C, black
ice may still be on the road surface – warning, drive with care!
Note
In certain national versions the displays appear in the Imperial system of meas-
ures.
11
12
12
12
13

The multifunction display is equipped with two automatic memories. The selected
» Fig. 6 on page 11.
memory is shown in the Display
The data of the single-trip memory (memory 1) is shown if a 1 appears in the dis-
play. A 2 shown in the display means that data relates to the total distance mem-
ory (memory 2).
Switching over the memory takes place with the button
on the windscreen wiper lever.
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the ig-
nition is switched on until it is switched off. New data will also flow into the cal-
culation of the current driving information if the trip is continued within 2 hours
after switching off the ignition. If the trip is interrupted for more than 2 hours,

the memory is automatically erased.
Total-trip memory (memory 2)
The total distance driven memory gathers data from any number of individual
journeys up to a total of 19 hours and 59 minutes driving or 1 999 kilometres driv-
en. The memory is deleted when either of these limits is reached and the calcula-
tion starts all over again.
Unlike the single-trip memory, the total-trip memory is not deleted after a period
of interruption of driving of 2 hours.
Memory
First read and observe the introductory information and safety warn-
ings on page 11.
» Fig.
Fig. 6
Multifunction display
6.
» Fig. 7 on page 12
B
Instruments and warning lights

11