For the sake of the environment Layout of this Owner's Manual (explanations) An Environmental note draws your attention to environmental protection aspects. This is where you will, for example, find tips aimed at reducing your fuel consump- tion. This Owner's Manual has been systematically designed to make it easy for you to search for and obtain the information you require.
Page 3
Preface You have opted for a ŠKODA – our sincere thanks for your confidence in us. You have received a vehicle with the latest technology and range of amenities. Please read this Owner's Manual carefully, because the operation in accordance with these instructions is a prerequisite for proper use of the vehicle.
Page 4
On-board literature If the service schedule is missing or in poor condition, please contact the special- The on-board literature for your vehicle consists of this “owner's manual” as well ist garage that regularly services your vehicle. You will need to request a dupli- as a “service schedule”...
Heating and air-conditioning Airbag system Table of Contents Heating, ventilation, cooling Description of the airbag system Heating Airbag overview Air conditioning system Deactivating airbags Abbreviations Communication and multimedia Transporting children safely Telephone and Move & Fun Child seat Using the system Fastening systems Driving Cockpit...
Jump-starting Towing the vehicle Fuses and light bulbs Fuses Bulbs Technical data Technical data Vehicle data Index Table of Contents...
Page 7
Abbreviations Abbreviation Definition Engine revolutions per minute Anti-lock brake system Automated transmission Compressed natural gas in g/km discharged quantity of carbon dioxide in grams per driven kilo- metre Electronic differential lock EPC fault light Electronic Stability Control Kilowatt, measuring unit for the engine output Manual gearbox Multifunction display Newton meter, measuring unit for the engine torque...
Light switch Using the system Bonnet release lever Regulator for headlamp beam adjustment for the headlights Lever for adjusting the steering wheel Cockpit Ignition lock Pedals Overview Regulator for left seat heating Radio Door opening lever on the driver's side Button for City Safe Drive system Electrical power window in the driver's door Handbrake lever...
Overview of the Instrument cluster Instruments and warning lights Instrument cluster Introduction This chapter contains information on the following subjects: Overview of the Instrument cluster Speedometer Fuel gauge Engine revolutions counter Counter for distance driven Service Interval Display Recommended gear Fig.
› With service interval display » page 10 First read and observe the introductory information and safety warn- › With multifunction display » page 11 ings on page 8. Reset button for the display of the daily trip counter (trip) »...
Avoid high engine speeds during the running-in period and before the engine has Note warmed up to the operating temperature . Information is retained in the Service Interval Display even after the vehicle bat- ■ For the sake of the environment tery is disconnected.
Multifunction display (onboard computer) Memory Introduction Fig. 6 Multifunction display This chapter contains information on the following subjects: Memory Operation Digital clock Multifunction display details Warning against excessive speeds The multifunction display can only be operated when the ignition is switched on. ...
Page 14
Note Digital clock All information in the memory 1 and 2 is erased if the battery of the vehicle is dis- First read and observe the introductory information and safety warn- connected. ings on page 11. The time is set as follows: Operation ›...
Page 15
Current fuel consumption Average speed The current fuel consumption level is shown in the display in litres/100 km . You The average speed since the memory was last erased is shown in the display can use this information to adapt your driving style to the desired fuel consump- in km/hour »...
If you wish to change the set speed limit, it is changed in 5 km/h intervals (e.g. the Cruise control system accepted speed of 47 km/h increases to 50 km/h or decreases to 45 km/h). Main beam › /...
WARNING WARNING If you have to stop for technical reasons, then park the vehicle at a safe dis- If you have to stop for technical reasons, then park the vehicle at a safe dis- ■ tance from the traffic, switch off the engine and activate the hazard warning tance from the traffic, switch off the engine and activate the hazard warning light system »...
CAUTION Electromechanical power steering The red oil pressure light is not an oil level indicator! One should therefore First read and observe the introductory information and safety warn- check the oil level at regular intervals, preferably after every refuelling stop. ...
Further information » page 78, Antilock Braking System (ABS). Note WARNING If the vehicle's battery has been disconnected and reconnected, the warning light comes on after switching on the ignition. The warning light should go out after If you have to stop for technical reasons, then park the vehicle at a safe dis- ■...
Warning light Airbag system If the warning light lights up and no gear can be selected, switch the ignition on and off. If the warning light lights up after you switch on the ignition, seek as- First read and observe the introductory information and safety warn- sistance from a specialist garage.
Cruise control system City Safe Drive First read and observe the introductory information and safety warn- First read and observe the introductory information and safety warn- ings on page 14. ings on page 14. The warning light comes on when the cruise control is operating »...
WARNING Unlocking and locking Always withdraw the key whenever you leave the vehicle – even if it is only ■ for a short time. This is particularly important if children are left in the vehicle. Unlocking and locking The children might otherwise start the engine or operate electrical equipment (e.g.
Page 23
Note Replacing the battery in the remote control key The system has to be synchronised, if the vehicle cannot be unlocked or locked ■ with the remote control key after replacing the battery » page If a key has an affixed decorative cover, this will be destroyed when the battery ■...
First read and observe the introductory information given on page 20. Opening/closing a door On vehicles without central locking, you can lock and unlock doors which do not have a locking cylinder from the inside. Locking › Push the door opening lever in the direction of the arrow so that the red mark- »...
Note Central locking system In the event of an accident in which the airbags are deployed, the locked doors ■ Introduction are automatically unlocked in order to enable rescuers to gain access to the vehi- cle. This chapter contains information on the following subjects: If the central locking fails, only the driver's door can be locked or unlocked using ■...
Page 26
WARNING Locking the vehicle with the key If the vehicle is locked from the outside and the safe securing system is acti- First read and observe the introductory information and safety warn- vated, there must not be any person in the vehicle as it is then no longer pos- ings on page 23.
The following applies if your vehicle has been locked using the central locking The key has a fold-open key bit which can be used for unlocking and locking the button. car manually and also for starting the engine. › It is not possible to open the doors or the luggage compartment lid from the If a lost key is replaced or if the receiver unit has been repaired or replaced, the outside (safety feature, e.g.
Unlocking the luggage compartment lid Synchronization › Press the button » Fig. 16. Further information » page First read and observe the introductory information given on page 25. Folding out the key bit › Press the button » Fig. Folding in the key bit If the vehicle cannot be unlocked by actuating the remote control system then it ›...
Unlocking/opening and closing Emergency unlocking Fig. 18 Emergency unlocking of the lug- gage compartment lid First read and observe the introductory information and safety warn- Fig. 17 Luggage compartment lid ings on page 26. First read and observe the introductory information and safety warn- The luggage compartment lid can be unlocked manually if there is a fault in the ings on page 26.
Page 30
WARNING Electric window opening/closing If the vehicle is locked from the outside, do not leave anybody in the vehicle ■ as it is not possible to open the windows from the inside in the event of an Fig. 19 emergency. Button on the driver's door When closing the windows, proceed with caution so as to avoid causing ■...
The sliding/tilting roof can still be operated for approx. 10 minutes after switching Manually opening/closing rear windows the ignition off. However, as soon as one of the front doors is opened it is no lon- ger possible to operate the sliding/tilting roof. Note Always close the sliding/tilting roof before unhooking the battery.
Page 32
Closing › Turn the switch to position » Fig. › To close, press the switch on the recess down and then push it forwards. Force limiter The sliding/tilting roof is fitted with a force limiter. The sliding/tilting roof stops and moves back several centimetres when it cannot be closed because there is something in the way (e.g.
Note Lights and visibility If the light switch is in the position , the ignition key is removed and the driv- ■ er's door is open, an audible warning signal will sound. The audible warning signal Lights is switched off by means of the door contact when the driver's door is closed (ig- nition off), however, the side lights remain on to illuminate the parked vehicle if necessary.
Headlight beam adjustment Function DAY LIGHT (daytime running lights) First read and observe the introductory information and safety warn- Fig. 23 ings on page 31. Dash panel: Lights and visibility Switching on daytime running lights › Turn the light switch to position 0 »...
Headlight flasher Rear fog light › Pull the lever towards the steering wheel (spring-tensioned position) in the di- rection of arrow » Fig. 24 - the main beam and warning light in the instru- First read and observe the introductory information and safety warn- ment cluster come on.
First read and observe the introductory information given on page 34. Note The hazard warning light system must be switched on if, for example: Switching on you encounter a traffic congestion; ■ › Press the switch into position »...
Switching off For the sake of the environment › Turn the switch » Fig. 28 into the 0 position. The heating should be switched off as soon as the window is de-iced or free from Operating with the door contact switch mist.
Replace the windscreen wiper blades once or twice a year for safety reasons. ■ Windscreen wipers and washers These can be purchased from a ŠKODA Partner. The ignition must not be switched on if the front windscreen wiper arms are fol- ■...
Periodic wiping First read and observe the introductory information and safety warn- › Position the lever upwards into position » Fig. ings on page 36. Slow wipe Before replacing the windscreen wiper blade, put the windscreen wiper arms into ›...
Replacing the rear windscreen wiper blade Interior mirror First read and observe the introductory information given on page 38. Fig. 33 Rear window wiper blade Basic setting › Pull the lever on the bottom edge of the mirror forward. Dimming mirror ›...
Folding in the exterior mirrors Exterior mirror › Carefully fold in the entire body of the exterior mirror toward the side window, fold it back from the side window until it audibly latches. WARNING Convex (curved outward) or a spherical exterior mirrors increase the vision ■...
WARNING Seats and stowing As the driver, observe the following instructions. Only adjust the driver's seat when the vehicle is stationary – risk of accident! ■ Front seats Maintain a distance of at least 25 cm to the steering wheel. Not maintaining ■...
Adjusting the front seats Foldable front passenger seat Fig. 36 Fig. 37 Control elements at the seat Folding the front passenger seat forward First read and observe the introductory information and safety warn- First read and observe the introductory information and safety warn- ings on page 40.
With repeated pressing of the switch, the level of the seat heating is down-regu- WARNING lated up to the switch-off. The level of the seat heating is indicated by the num- ber of illuminated warning lights in the switch. The front passenger airbag should be switched off when transporting ob- ■...
CAUTION Folding the rear seats forward Ensure that the seat belts are not damaged when operating the seat backrests. Fig. 39 Under no circumstances must the rear seat belts be jammed by the folded back seat backrests. Unlock the seat backrest ...
Example: In the event of a frontal collision at a speed of 50 km/h, an unsecured WARNING object with a weight of 4.5 kg produces an energy, which corresponds to 20 times its own weight. This means that it results in a weight of approx. 90 kg “ ”. You can The head restraints must be correctly adjusted in order to offer effective ■...
CAUTION Bag hooks Please ensure that the heating elements for the rear window heater are not dam- aged as a result of abrasive objects. Fig. 42 Luggage compartment: Bag Note hooks The tyre pressure must be adjusted to the load . ...
CAUTION Fixing nets Do not place any sharp objects in the nets – risk of net damage. Luggage compartment cover Fig. 45 Removing/installing the luggage compartment cover Fig. 43 Fixing nets/fastening details in the rear area of the luggage com- partment ...
Expanding luggage compartment downwards CAUTION › Lift the load floor and push into the grooves » Fig. 47 - . › Place the load floor on the base of the luggage compartment. Make sure that the luggage compartment cover is correctly engaged in the side holders »...
CAUTION CAUTION Only use roof rack systems approved by ŠKODA AUTO a.s. Observe the information regarding the assembly and disassembly in the enclosed ■ If other roof rack systems are used or if the roof bars are not fitted correctly, instructions.
Page 51
Cup holder Ash tray Fig. 50 Front centre console: Ashtrays First read and observe the introductory information given on page 48. Fig. 49 Centre console: Cup holder at the front/rear First read and observe the introductory information given on page 48. Open/close ›...
Cigarette lighter 12-volt power socket Fig. 51 Fig. 52 Centre console: Cigarette lighter Centre console: Power socket First read and observe the introductory information given on page 48. First read and observe the introductory information given on page 48. Operating the cigarette lighter The 12-Volt power socket is located in the front centre console »...
Before turning the ignition on or off, and before starting the car, switch off the First read and observe the introductory information given on page 48. ■ device connected to the 12-volt power socket to prevent any damage caused by voltage fluctuations.
First read and observe the introductory information and safety warn- Storage compartment on the driver's side ings on page 51. The open stowage compartment can be found underneath the dash panel on the Fig. 54 driver's side » Fig. Dash panel: Storage compart- ment on the driver's side Bag hooks...
First read and observe the introductory information and safety warn- Multimedia holder ings on page 51. The insides of the front seat rests have meshed pockets » Fig. Fig. 60 Front centre console: Multimedia These meshed pockets are designed for small, light objects, such as a mobile holder phone or MP3 player.
Note Heating and air-conditioning The used air streams out through the vents in the luggage compartment. ■ We recommend that you do not smoke in the vehicle when the recirculating air ■ Heating, ventilation, cooling mode is operating since the smoke which is drawn at the evaporator from the in- terior of the vehicle forms deposits in the evaporator of the air conditioning sys- tem.
Note Heating Do not cover the air outlet vents with objects of any kind. Introduction Using the air conditioning system economically This chapter contains information on the following subjects: Control elements First read and observe the introductory information and safety warn- Setting heating ...
All controls apart from the blower switch can be set to any desired intermedi- Note ate position. If the air distribution is positioned towards the windows, the total amount of air is The blower should always be on to prevent the windows from misting up. used to defrost the windows and thus no air will be fed to the footwell.
The warning light in the button lights up. Note › Press the button. We recommend that you have the air conditioning system cleaned by a specialist The warning light in the button goes out. garage once every year. Note Control elements If the air distribution is positioned towards the windows, the total amount of air ■...
Page 61
Setting the air conditioning system First read and observe the introductory information given on page 57. Recommended basic settings of the control elements of the air conditioning system for the respective operating modes: Button » Fig. 65 Setting the regulator »...
WARNING (Continued) Communication and multimedia If a mobile phone or a two-way radio system is operated in a vehicle without ■ an external aerial or an external aerial which has been installed incorrectly, Telephone and Move & Fun this can increase the strength of the electromagnetic field inside the vehicle. Two-way radio systems, mobile phones or mounts must not be installed on ■...
Setting the tilt of the multifunction device Multifunction deviceMove & Fun › You can set the tilt to the required position by moving the multifunction device in the direction of the arrows » Fig. 67 » Fig. 66 Removing the multifunction device Cap of the opening for the cradle ›...
Page 64
WARNING (Continued) Unsecured or incorrectly secured multifunction devices may be thrown ■ through the interior of the vehicle and cause injuries in a sudden driving or braking manoeuvre or accident. Adjust the volume to ensure that acoustic signals from outside, e.g. sirens ■...
WARNING (Continued) Driving When driving, the ignition key must always be in the position » Fig. 69 ■ page 65 (ignition switched on) without the engine running. This position is indicated by the warning lights coming on. If this is not the case, this could re- Starting-off and Driving sult in unexpected locking of the steering wheel –...
› Pull the lever » Fig. 68 below the steering wheel down. For the sake of the environment › Adjust the height of the steering wheel to the desired position. › Push the lever upwards to the stop. Do not warm up the engine while the vehicle is stationary. If possible, start your ...
If the engine does not start within 10 seconds, abort the start-up process and Ignition lock turn the key to position . Repeat the start-up process after approx. half a mi- nute. Fig. 69 Release the handbrake before starting off. ...
Corrosion CAUTION Corrosion on the brake discs and dirt on the bake pads occur if the vehicle has been parked for a long period and if you do not make much use of the braking Observe the recommendations on the new brake pads »...
The handbrake warning light lights up when the handbrake is applied, provided The reversing lights will come on once reverse gear is engaged, provided the igni- the ignition is on. tion is on. A warning signal sounds if the vehicle is inadvertently driven off with the hand- WARNING brake applied.
Kickdown function If the selector lever position N is accidentally selected while driving, it is first nec- essary to release pressure on the accelerator pedal and wait for the idling speed Operational faults of the engine to be reached before the selector lever can be engaged in the drive WARNING position.
- Manual gearshift (Tiptronic) Selector lever positions Further information » page Fig. 72 Manual gearshift (Tiptronic) Selector lever First read and observe the introductory information and safety warn- ings on page 67. – Neutral Fig. 73 Selector lever: manual shifting/instrument cluster: engaged gear The transmission is in Neutral in this position.
If you operate the kickdown function, the gearbox shifts into a lower gear in line Note with the vehicle speed and engine speed. If the automatic gearbox is faulty, seek help from a specialist garage as soon as Note possible and have the fault fixed. ...
On vehicles fitted with a manual gearbox, at the very latest shift up into the next Economical driving and environmental sustainability gear when the red area is reached. Very high engine speeds when accelerating (accelerator) are automatically restricted » Introduction With vehicles with a manual gearbox, do not drive at unnecessarily low engine speeds.
Looking ahead Avoiding full throttle First read and observe the introductory information given on page 71. Fig. 75 Principle sketch: Fuel consump- tion in litres/100 km. and speed A vehicle's highest fuel consumption occurs when accelerating, therefore unnec- essary accelerating and braking should be avoided. If looking ahead when driving, in km/h.
If an engine is only idling it takes much longer for it to reach its normal operating Avoid short distances temperature. Wear-and-tear and pollutant emissions, though, are particularly high in the warming-up phase. Therefore, start driving as soon as the engine has started, whereby high engine speeds should be avoided.
Design measures Avoid unnecessary ballast › Joints designed to be easily detached. › Simplified disassembly due to the modular structure system. First read and observe the introductory information given on page 71. › Improved purity of different classes of materials. ›...
› Determine the depth of the water before driving through. Avoiding damage to your vehicle The water level must not reach above the bar on the lower beam » Fig. › Do not drive any faster than at a walking speed. Introduction At a higher speed, a water wave can form in front of the vehicle, which can cause This chapter contains information on the following subjects:...
Driving abroad Introduction This chapter contains information on the following subjects: Unleaded petrol Headlights In certain countries, it may be possible that the ŠKODA Partner network is limited or has not been established. This is the reason why procuring certain spare parts may be somewhat complicated and specialist garages may only be able to make limited repairs.
Electronic Stability Control (ESC) Assist systems First read and observe the introductory information and safety warn- ings on page 77. Brake assist systems The ESC system helps improve control of the vehicle in situations where it is be- ing operated at its dynamic limits, such as a sudden change to the direction of Introduction travel.
The brake pressure drops gradually the more you operate the accelerator pedal. If Electronic Differential Lock (EDL) the vehicle does not start off within 2 seconds, it starts to roll back. The HHC is active on slopes of 5% and steeper, provided that the driver's door is First read and observe the introductory information and safety warn- closed.
Activating/deactivating the parking aid CAUTION The parking aid is activated automatically when reverse gear is engaged and the ignition is turned on. This is confirmed by a brief audible signal. If a warning signal sounds for about 3 seconds after activating the system and ■...
WARNING WARNING Concentrate fully at all times on your driving! As the driver you are fully re- For safety reasons, the cruise control system must not be used in dense ■ sponsible for the operation of your vehicle. Only use the system so that you traffic or on unfavourable road surfaces (such as icy roads, slippery roads, are in full control of your vehicle in every traffic situation - risk of accident! loose gravel) –...
Decreasing the speed Storing a speed › The stored speed can be reduced by pressing the rocker button » Fig. 80 page 81 into the position SET. › The speed will decrease continuously, if the rocker button is pressed and held in Fig.
First read and observe the introductory information and safety warn- START/STOP ings on page 82. The START-STOP system helps you to save fuel while at the same time reducing Introduction harmful exhaust emissions and CO emissions. This chapter contains information on the following subjects: The function is automatically activated each time the ignition is switched on.
› The temperature of the vehicle battery is not too low or too high. City Safe Drive › There is sufficient pressure in the braking system. › The difference between the outdoor- and the set temperature in the interior is not too great.
Page 86
› In the event of snow, heavy rain or fog. Note › When vehicles are travelling side by side. › When vehicles are crossing. When replacing the windscreen wiper blades, only use windscreen wiper blades ■ › When vehicles are approaching in the same lane. approved by the manufacturer.
Page 87
When the City Safe Drive system is switched off while the vehicle is travelling at a Special driving situations speed between 5–30 km/h (3–19 mph), the warning light will light up in the instrument cluster display. You can switch on the City Safe Drive system again with the button »...
Page 88
Other vehicles changing lanes Vehicles which move into your lane close to your vehicle can trigger an unexpec- ted braking of the City Save Drive system » Fig. Driving...
› Head, thorax, driver and front seat passenger side airbag with head restraint Safety function; › Anchoring points for child seats using the ISOFIX system. › Anchoring points for child seats using the TOP TETHER system. › Passive Safety Height-adjustable rear head restraints; ›...
WARNING What influences the driving safety? As the driver, observe the following instructions. First read and observe the introductory information and safety warn- Always assume the correct seated position before setting off and do not ■ ings on page 87. change this position while driving.
Front passenger adjustment » page 41, Adjusting the front seats. Correct seated position for the driver Correct seated position for the passengers in the rear seats Fig. 86 Correct seated position for the First read and observe the introductory information and safety warn- driver ings on page 88.
Page 92
› Do not lean out of the window. › Do not put your feet out of the window. › Do not put your feet on the dash panel. › Do not put your feet on the seat cushion. › Do not allow anybody to travel in the footwell. ›...
WARNING Seat belts Fasten your seat belt before each journey – even when driving in town! This ■ also applies to the passengers seated at the rear – risk of injury! Using seat belts Expectant women must also always wear a seat belt. This is the only way of ■...
WARNING (Continued) The physical principle of a frontal collision The slot of the belt tongue must not be blocked, otherwise the belt tongue ■ will not lock in place properly. Many layers of clothing and loose clothing (e. g. a winter coat over a jacket) ■...
› It is also important that rear passengers fasten their seat belts, as they could oth- Use the lock tongue to slowly pull the webbing over your chest and pelvis. › erwise be thrown through the vehicle in an uncontrolled manner in the event of Insert the lock tongue into the belt buckle for the seat until audibly it clicks into an accident.
WARNING Inertia reels Any work on the belt tensioner system including removal and installation of ■ First read and observe the introductory information given on page 93. system components because of other repair work, must only be carried out by a specialist garage.
System description Airbag system First read and observe the introductory information and safety warn- ings on page 95. Description of the airbag system The functional status of the airbag system is indicated by the indicator light the instrument cluster »...
The airbags are not deployed in the case of minor frontal and side collisions, rear- Front airbags end collisions, tilting of the vehicle and vehicle rollover. Deployment factors It is not possible to generally determine which deployment conditions apply to the airbag system in every situation.
Page 99
WARNING Side airbags Head-Thorax Correct seated position For the driver and front passenger, it is important to maintain a distance of ■ at least 25 cm to the steering wheel or dashboard » Fig. 92. Not maintain- ing this minimum distance will mean that the airbag system will not be able to properly protect you –...
WARNING (Continued) WARNING (Continued) There must not be any further persons, animals as well as objects posi- Any seat or protective covers which you fit to the driver or front passenger ■ ■ tioned between the occupants and the deployment area of the airbag. No ac- seats must only be of the type expressly authorized by ŠKODA.
Page 101
We recommend that you ask a ŠKODA service partner to deactivate any other air- Switching off › bags. Switch off the ignition. › Use the key to turn the slot of the key switch into position » Fig. 94 OFF. Monitoring the airbag system ›...
WARNING (Continued) Transporting children safely Children are at increased risk of injury in the event of an accident if they lean ■ forward or are not correctly positioned when the vehicle is moving, e.g. an in- Child seat correct seated position. This particularly applies to children who are transpor- ted on the front passenger seat as they can suffer severe, or even fatal inju- ries if the airbag system is deployed! ...
WARNING Use of a child seat on the front passenger seat The front passenger airbag must be deactivated if using a rear-facing child ■ Never use a backwards-facing child restraint system on a seat that is protected seat on the front passenger seat »...
There must be sufficient room between the child and the deployment area of the Group Front passenger seat Rear seats side airbag so that the airbag can provide as much protection as possible » Fig. 96 – . 9-18 kg WARNING 15-25 kg Children must never be seated with their head in the deployment area of...
Page 105
WARNING Anchor eyelets for the ISOFIX system Always refer to the instructions from the manufacturer of the child seat ■ when installing and removing a child seat with the ISOFIX system. Never attach other child seats, belts or objects to the anchor eyelets inten- ■...
Page 106
Size category Group Front passenger seat Rear seats of the child seat IL-SU 9-18 kg The size category is shown on the label attached to the child seat. IL-SU The seat is suited for installation of an ISOFIX child seat with “Semi- WARNING Universal”...
CAUTION General Maintenance Do not wash your vehicle in bright sunlight – risk of paint damage. Taking care of and cleaning the vehicle For the sake of the environment Only wash the vehicle at washing bays intended for this purpose. ...
If your vehicle is fitted with any particular attached parts, such as a spoiler, roof Taking care of your vehicle exterior rack system, two-way radio aerial etc., it is best to consult the operator of the car wash system beforehand. ...
For the sake of the environment CAUTION Used vehicle care product cans represent hazardous waste that is harmful to the Never apply wax to the windows. ■ environment. These must be disposed of in accordance with national legal regula- Mat painted or plastic parts must not be treated with polishing products or hard ■...
Chrome parts Windows and exterior mirrors First read and observe the introductory information and safety warn- First read and observe the introductory information and safety warn- ings on page 106. ings on page 106. First clean the chrome parts with a damp cloth and then polish them with a soft, Use a plastic ice scraper for removing snow and ice from the windows and mir- dry cloth.
CAUTION Wheels Never wipe headlights to dry. ■ First read and observe the introductory information and safety warn- Do not use any sharp objects to clean the plastic lenses, as this may damage ■ ings on page 106. the protective paintwork and consequently cause cracks to form on the headlight lenses.
Do not clean the roof panelling with a brush – risk of damage to the surface of ■ WARNING the panelling. Air fresheners and scents can be hazardous to heath when the temperature in- Never use additional underbody protection or anti-corrosion agents for ex- ■...
Page 113
Treat the leather regularly and at suitable intervals using a suitable leather care Fabric product. Clean upholstery cover materials and cloth trims on doors, luggage compartment cover, etc. using specific cleaning agents, e.g., dry foam. CAUTION Use a soft sponge, brush, or commercially available microfibre cloth. Ensure that no part of the leather is soaked through during cleaning and that ■...
Airbags CAUTION Trailer operation Regularly remove dust from the seat covers using a vacuum cleaner. ■ The instructions and guidelines from ŠKODA AUTO a.s. must be observed when Electrically heated seats must not be dried after cleaning by switching on the ■...
Page 115
For the sake of the environment Spoiler Technical documents regarding alterations carried out on the vehicle must be First read and observe the introductory information and safety warn- kept by the vehicle user in order to be handed over to the recyclers at a later ings on page 112.
Page 116
WARNING Trailer operation Observe the following instructions for handling the airbag system. First read and observe the introductory information and safety warn- It is prohibited to manipulate individual parts of the airbag system, as this ■ ings on page 112. might result in the airbag being deployed.
Refuelling Inspecting and replenishing Fig. 99 Fuel Filler flap with tank cap screwed Introduction This chapter contains information on the following subjects: Refuelling Unleaded petrol Vehicles running on CNG (compressed natural gas) » page 116. First read and observe the introductory information and safety warn- The correct grades of fuel for your vehicle are listed on a sticker affixed to the in- ings on page 115.
Fuel additives Unleaded petrol Only use unleaded petrol, which complies with the standard EN 228 (in Germany: standard DIN 51626-1 or E10 for unleaded fuel with an octane rating of 95 RON First read and observe the introductory information and safety warn- and 91 RON or DIN 51626-2 or E5 for unleaded fuel with an octane rating of ings on page 115.
Page 119
WARNING Refuelling When operating a CNG-powered vehicle, the national legal requirements ■ must be observed. Fig. 100 If a fault occurs or a leak in the natural gas system is suspected or if you Fuel filler ■ smell gas, proceed as follows: Stop immediately and switch off the ignition (this will close the solenoid ■...
Page 120
In the following situation, it is possible that the tank cannot be fully filled with Automatic switching from CNG to petrol mode natural gas. › At very high ambient temperatures. The natural gas refuelling systems have First read and observe the introductory information and safety warn- overheating protection.
Page 121
Safe natural gas CNG labels First read and observe the introductory information and safety warn- ings on page 116. The safety concept of the natural gas system ensures safe operation. It is equip- ped with the following security features. ›...
WARNING (Continued) Engine compartment Do not touch any hot engine parts – risk of burns! ■ The coolant additive and thus all of the coolant is harmful to your health. ■ Introduction Avoid contact with the coolant. ■ Coolant vapours are harmful to health. ■...
Page 123
WARNING Opening and closing the bonnet Read and observe the information and warning instructions on the fluid con- ■ tainers. Keep fluids in their original containers and keep securely out of the reach of ■ children! If you intend to work underneath the vehicle, you must secure the vehicle ■...
Page 124
› Take the bonnet support out of its holder in the direction if the ar- Radiator fan » Fig. 104 and secure the opened bonnet by inserting the end of the sup- port in the opening designed for it. First read and observe the introductory information and safety warn- ings on page 120.
CAUTION CAUTION Under no circumstances must radiator antifreeze or other additives be added to Do not pour any additives into the engine oil – risk of serious damage to the en- ■ the windscreen washer fluid. gine parts! Damage, which results from such product, are excluded from the war- Do not remove the filter from the windscreen washer fluid reservoir when refill- ranty.
One should therefore check the oil level at regular intervals, preferably every time Checking the oil level after the fuel tank is filled or after driving for long stretches. We recommend maintaining the oil level within the range , but not above, if Fig.
Note CAUTION If oil comes into contact with your skin, the affected area must be washed thor- The concentration of coolant additive in the coolant must never be under 40%. ■ oughly. Over 60% of coolant additive in the coolant reduces the antifreeze protection ■...
› Place a cloth over the cap of the coolant expansion reservoir » Fig. 108 Checking the coolant level page 126 and unscrew the cap carefully. › Replenish the coolant. › Turn the cap until it clicks into place. Fig. 108 Engine compartment: Coolant Do not use an alternative additive if the specified coolant is not available in an expansion reservoir...
Vehicle battery Checking the brake fluid level Introduction Fig. 109 Engine compartment: Brake fluid reservoir This chapter contains information on the following subjects: Checking the battery electrolyte level Operation in winter Charging a vehicle battery Disconnecting and reconnecting the vehicle battery Replacing the vehicle battery ...
Page 130
WARNING (Continued) WARNING Do not tilt the battery otherwise battery electrolyte may flow out of the bat- ■ When you charge a battery, hydrogen is released, and a highly explosive gas ■ tery vent openings. Protect your eyes by wearing safety goggles or a face mixture is also produced.
Note Note You should replace batteries older than 5 years. The battery acid level is also checked regularly by a specialist garage as part of ■ the inspection service. For technical reasons, on vehicles with the description “AGM”, the electrolyte ■...
It is not normally necessary to disconnect the cables of the battery if you re- Replacing the vehicle battery charge the vehicle battery using low amperages (as for example from a mini- charger). Refer to the instructions of the charger manufacturer. ...
WARNING (Continued) Wheels Unusual vibrations or pulling of the vehicle to one side could be a sign of ■ tyre damage. If there is any doubt that a wheel is damaged, immediately re- Tyres and wheel rims duce your speed and stop! If no external damage is evident, drive slowly and carefully to the nearest specialist garage to have the vehicle checked.
WARNING Service life of tyres Observe the following information regarding the wheel bolts. The wheel bolts must be clean and must turn easily. Never apply grease or ■ oil. The prescribed tightening torque for the wheel bolts is 110 Nm for steel and ■...
Always check the inflation pressure when the tyres are cold. Do not reduce the Tyre age higher pressure of warm tyres. Tyres age and lose their original characteristics, even if they are not being used. Therefore, we recommend not using summer or winter tyres older than 6 or With greater additional load, adjust the tyre inflation pressure accordingly.
615 kg Spare wheel 630 kg 650 kg Fig. 113 Speed symbol Luggage compartment: Spare wheel This indicates the maximum permissible vehicle speed with fitted tyres in each category. 150 km/h 160 km/h 170 km/h 180 km/h 190 km/h First read and observe the introductory information and safety warn- 200 km/h ings...
WARNING Wheel bolts Never use the temporary spare wheel if it is damaged. ■ If the dimensions or design of the temporary spare wheel differ from the fit- Fig. 114 ■ ted tyres, never drive faster than 80 km/h (or 50 mph). Remove the cap Avoid accelerating at full throttle, sharp braking and fast cornering.
For technical reasons, it is only permissible to fit snow chains with the following Winter operation wheel/tyre combinations. Tyre size Introduction 165/70 R14 5J x 14 ET 35 This chapter contains information on the following subjects: Only fit snow chains with links and locks not larger than 15 mm. Winter tyres Remove the full wheel trims before installing the snow chains.
Fire extinguisher Do-it-yourself First read and observe the introductory information given on page 137. Emergency equipment and self-help The fire extinguisher is located at a holder in the foot well in front of the front passenger seat. Emergency equipment Please read carefully the instructions which are attached to the fire extinguish- ...
WARNING Vehicle tool kit The factory-supplied lifting jack is only intended for your model of vehicle. ■ Under no circumstances use it to lift heavier vehicles or other loads – risk of injury! Ensure that the vehicle tool kit is safely secured in the luggage compart- ■...
Page 141
› Let all of the occupants get out. While changing a tyre, the occupants of the WARNING vehicle should not stand on the road (instead they should remain behind a crash barrier). Observe the following instructions for lifting the vehicle. ›...
Page 142
› Stow and attach the replaced wheel in the spare wheel compartment using a Tightening › special screw » page 134. Push the wheel wrench onto the wheel bolt up to the stop › › Stow the vehicle tool kit in the space provided. Grasp the end of the wrench and turn the bolt to the right until it is tight.
Page 143
Raising the vehicle Securing wheels against theft Fig. 117 Fig. 119 Jacking points for positioning Principle sketch: Anti-theft lifting jack wheel bolt with adapter First read and observe the introductory information and safety warn- ings on page 138. The anti-theft wheel bolts on vehicles fitted with them (one anti-theft wheel bolt per wheel) can only be loosened or tighten up by using the adapter provided.
WARNING (Continued) Breakdown kit A tyre filled with sealant has the same driving characteristics as a standard ■ tyre. Introduction Do not drive faster than 80 km/h (50 mph). ■ Avoid accelerating at full throttle, sharp braking and fast cornering. ■...
Page 145
Components of the breakdown kit Preparing to use the breakdown kit First read and observe the introductory information and safety warn- ings on page 142. The following preparatory work must be carried out before using the breakdown kit. › In the event of a puncture, park the vehicle as far away as possible from the flow of traffic.
Inflating Check after driving for 10 minutes › Screw the tyre inflation hose » Fig. 120 on page 143 of the air compressor firmly onto the tyre valve. First read and observe the introductory information and safety warn- › Check that the air release valve is closed.
WARNING Jump-starting A discharged vehicle battery may already freeze at temperatures just below ■ 0 °C. In case of frozen battery carry out no jump-starting – risk of explosion! Fig. 121 Pay attention to the warning instructions relating to working in the engine Jump-starting using the battery ■...
› On vehicles with a manual transmission, only push down on the accelerator Jump-starting in vehicles with the START-STOP system pedal once the rope is taught. The maximum towing speed is 50 km/h. Fig. 122 Driver of the towed vehicle Engine compartment: Engine ›...
Page 149
Note CAUTION We recommend using a tow rope from ŠKODA Original Accessories, which is The towing eye must always be screwed in fully and firmly tightened, otherwise ■ available from a ŠKODA Partner. the towing eye can tear when towing in or tow-starting. ...
WARNING Fuses and light bulbs Always read and observe the warnings before completing any work in the en- gine compartment » page 120, Engine compartment. Fuses CAUTION Introduction Never “repair” fuses and also do not replace them with a fuse of a higher am- ■...
› Press the locking mechanism and carefully open the cover in the direction of Power consumer the arrow. Turn signal, brake light › After the fuse has been replaced, fold the cover upwards in the opposite direc- Main beam tion of the arrow so that it audibly latches. Instrument cluster, main beam Fuse assignment on the underside of the dash panel Not assigned...
Page 152
Fuses in the engine compartment Fuses in the dash panel Fig. 125 Engine compartment: Distribution board cover/fuses Fig. 126 On the driver's side of the dash panel: Fuse box cover/Schematic di- agram of the fuse box First read and observe the introductory information and safety warn- ...
Power consumer CAUTION Starter Do not take hold of the glass bulb with naked fingers (even the smallest ■ DC-DC voltage converter amount of dirt reduces the working life of the light bulb). Use a clean cloth, nap- kin, or similar. When removing and installing the number plate light and tail light make sure ■...
- Low beam and main beam First read and observe the introductory information and safety warn- ings on page 151. - Parking and daytime running light › Push the side repeater turn signal light in the direction of the arrow Changing the bulb for the front turn signal light ›...
› Return the expanding rivet, screw in. Tail light › Firmly tighten the two attachment bolts with the screwdriver. Replacing the bulb for the licence plate light Fig. 131 Removing the tail lamp assembly Fig. 130 Changing the bulb for the licence plate light ...
Page 156
› Hold the tail light assembly in the installation position with one hand, and re- move the plastic nut with the other. › Carefully remove the tail light from the body and place it on a clean, smooth sur- face. ›...
First read and observe the introductory information given on page 155. Technical data Vehicle data sticker The vehicle data sticker » Fig. 133 is located on the base of the luggage compart- Technical data ment and is also fixed in the service schedule. The vehicle data sticker contains the following data: Vehicle data Vehicle identification number (VIN)
The payload consists of the following components: Dimensions › Passengers › All items of luggage and other loads First read and observe the introductory information given on page 155. › Roof load including roof rack system › Equipment not included in the operating weight. Dimensions (mm) Fuel consumption and CO emissions according to ECE standards and EU...
Page 159
Vehicle-specific information depending on engine type First read and observe the introductory information given on page 155. The specified values have been determined in accordance with rules and under conditions set out by legal or technical requirements for determining operational and technical data for motor vehicles.
City Safe Drive Braking Index Cruise Control System Information on braking Breakdown kit 16, 77 Bulbs Numbers and Symbols Parking aid In the tail light START/STOP Replacing 12-volt power socket Button in the driver's door Traction Control System (TCS) Electrical power windows Visual parking system Automatic gearbox Abroad...
Page 161
Child seat Compressed natural gas Driving Classification See CNG Abroad ISOFIX Driving through water on streets Computer on the front passenger seat Emissions see Multifunction display TOP TETHER Fuel consumption Coolant Use of child seats Trailer operation Checking Use of ISOFIX child seats Driving through water Replenishing Chrome parts...
Page 162
Engine oil Gear changing Capacity lever Changing Gear switching Lever Checking Energy-efficient driving Main beam Replenishing General view Turn signal Specifications Cockpit Light Engine revolutions counter Cockpit Environment Headlight beam adjustment Environmental compatibility Headlight flasher Handbrake Environmentally friendly driving Low beam Head-Thorax Main beam Headlights...
Page 163
Unlocking the luggage compartment lid Recommended gear Variable loading floor Refuelling Luggage compartment lid 26, 27 Fuel Paintwork Regulation See Paintwork care Headlight beam Paintwork care Remote control Parking Maintenance Synchronisation process Parking aid Decorative films Remote control key Visual parking system Manual gear changing Replacing the battery Parking ticket holder...
Page 164
Safety Sliding/tilting roof Child safety Closing Child safety seats Opening and tilting Taking care of the vehicle Correct seated position Operation Natural leather Head restraints Snow chains Seat belts ISOFIX Spare wheel Taking care of your vehicle TOP TETHER Speedometer Artificial leather Saving electrical energy Speed symbol...
Page 165
Transport Vehicle key Spare wheel Luggage compartment Speed symbol Vehicle length Roof rack system Storing wheels Vehicles with CNG mode Tyre pressure Transporting children safely See CNG Tyre sizes Two-way radio systems Vehicles with natural gas mode Tyre wear indicator Type plate See CNG Unidirectional tyres...
Page 166
ŠKODA AUTO a.s. pursues a policy of constant product and model development. Reprinting, reproduction, translation, or any other use, either in whole or in part, We trust that you will understand that changes to models in terms of shape, is not permitted without the written consent of ŠKODA AUTO a.s.. equipment and engineering, may be introduced at any time.
Page 169
Also please pay attention to those parts in the Owner's Manual that are marked below. Work with us – for the sake of the environment. Návod k obsluze Citigo anglicky 05.2013 S10.5610.06.20 1ST 012 003 GB...