Replacing The Windscreen Wiper Blades - KODA Citigo Owner's Manual

Periodic wiping
›
Position the lever upwards into position
Slow wipe
›
Position the lever upwards into position
Fast wipe
›
Position the lever upwards into position
Automatic wipe/wash for windscreen
›
Pull the lever towards the steering wheel into the spring-tensioned position
» Fig. 31, the wash system and the windscreen wipers will operate.
5
›
Release the lever. The windscreen wash system stops and the wiper continues
for another 1-3 wiper strokes (depending on the period of spraying of the wind-
screen).
Wiping the rear window pane
›
Push the lever away from the steering wheel into position
windscreen wiper will operate every 6 seconds.
Automatic wipe/wash for the rear window
›
Push the lever away from the steering wheel into the spring-tensioned position
» Fig. 31, the windscreen wiper and wash system will operate.
7
›
Release the lever. The washer system stops and the wiper continues for anoth-
er 1-3 wiper strokes (depending on the duration of the spraying process). The
lever will stay in position after releasing it
Switching windscreen wipers off
›
Move the lever back into the home position

Replacing the windscreen wiper blades

» Fig. 31.
1
» Fig. 31.
2
» Fig. 31.
3
6 » Fig. 31 and the
.
6
» Fig. 31.
0
Fig. 32
Windscreen wiper blade

First read and observe the introductory information and safety warn-
ings on page 36.
Before replacing the windscreen wiper blade, put the windscreen wiper arms into
the service position.
Service position for changing wiper blades
›
Closing the bonnet.
›
Switch the ignition off and on again.
›
Press the windscreen wiper lever into position
windscreen wiper arms will move into the service position.
Removing the wiper blade
›
Raise the windscreen wiper arm from the rear window and slightly tilt the wind-
screen wiper blade towards the wiper arm, arrow
›
Hold the windscreen wiper arm at the top end.
›
Unlock the locking button
1
row .
B
Attaching the wiper blade
›
Push the windscreen wiper blade until the stop and it locks in place.
›
Check that the wiper blade is correctly attached.
›
Fold the wiper arm back to the windscreen.
›
Turn on the ignition and press the windscreen wiper lever into position
» Fig. 31 on page 36, the windscreen wiper arms move to the home position.
4

» Fig. 31 on page 36, the
4
» Fig. 32.
A
and remove the wiper blade in the direction of ar-
Lights and visibility

37