Measurement Unit Setting; Machine Authentication Pw Change; Default Setting Simplex/Duplex; Auto Paper/Auto Zoom - Konica Minolta bizhub 200 User Manual

Utility mode

Measurement Unit Setting

Tab Parameter
1/6 Measurement Unit
Setting

Machine Authentication PW Change

Tab Parameter
1/6 Machine Authenti-
cation PW Change
Note
This parameter appears only when the machine is being used with the
machine user authentication settings specified.

Default Setting Simplex/Duplex

Tab Parameter
2/6 Default Setting
Simplex/Duplex

Auto Paper/Auto Zoom

Tab Parameter
2/6 Auto Paper/Auto
Zoom
200/250/350
Description
Select one of the following as the meas-
urement units in which values are dis-
played in the touch panel.
mm (Num. Value), Inch (Num. Value),
Inch (Fraction)
Description
The password entered for machine au-
thentication with user authentication can
be changed.
• Current Password:
Type in the currently specified ma-
chine authentication password.
• New Password:
Type in the new machine authentica-
tion password.
• Confirm New Password:
Type in the new machine authentica-
tion password again for confirmation.
Description
Select one of the following as the default
Single/Double-Sided setting.
If the "Simplex -> Duplex" parameter in
the Tech. Rep. Choice screen is set to
"duplex only", [1→1] does not appear.
For details, contact your technical repre-
sentative.
1→2, 2→2, 1→1
Description
Select one of the following as the default
setting.
Auto Paper Select, Auto Zoom, Manual
11
Default Setting
Inch (Num. Value)
Default Setting
-
Default Setting
1→1
Default Setting
Auto Paper Select
11-11