Konica Minolta bizhub 200 User Manual page 267

7
4
Select the desired spe-
cial paper type.
What types of paper
?
can be loaded into
each paper tray?
% There are limits on
the types of paper
that can be loaded in
a paper tray. For de-
tails on the types of
paper that can load-
ed, refer to "Specifications" on page 6-2 and "Paper types and pa-
per capacities" on page 7-4.
5
Touch [Enter].
The Paper screen appears again.
The paper type for the bypass tray is set.
Reminder
If overhead projector transparencies or thick paper is loaded into the by-
pass tray, be sure to select the corresponding paper type, otherwise a
paper misfeed may occur.
!
Detail
For details on the special paper, refer to "Special paper" on page 7-5.
For details on specifying the settings for paper only for single-sided cop-
ying, for recycled paper and for special paper, refer to "Special Paper
Setting" on page 11-12.
The settings for overhead projector transparencies, thick paper, thin pa-
per and envelopes can also be specified for the bypass tray, even if a set-
ting for paper only for single-sided copying, for recycled paper and for
special paper is specified.
7-16
Copy paper/original documents
200/250/350