Glossary - Konica Minolta bizhub 200 User Manual

12
12.2

Glossary

Term
Simplex/Duplex
Access lock
Accessibility
Account Track
ADF
AMS
APS
ATS
Automatic paper-tray-
switching feature
Automatic panel reset
Auto Paper Select
Auto Zoom
B/W Reverse
Center Erase
Change Tray Settings
Chapters
Combine Originals
Cover Mode
Density
Edge/Frame Erase
12-4
Definition
Select the setting to specify if the scanned document and the printed
copy are printed on just one side or both sides.
Operations that the access lock is applied to are locked so that the
password cannot be entered after it has been incorrectly entered
three consecutive times.
Specify these settings to set up and adjust the control panel and
touch panel.
Set this function to group users into accounts and manage their use
of the machine (printing and scanning counts and number of prints).
Reverse automatic document feeder; Can be used to automatically
scan the document
Auto Magnification Select; "Auto Zoom" setting
"Auto Paper Select" setting
Automatic paper-tray-switching feature (ATS = Auto tray switch)
If a paper tray runs out of paper while copies are being printed and
the same size of paper is detected in a different paper tray, that pa-
per tray is selected so that copying can continue.
The machine automatically performs this operation to return all set-
tings to their defaults if no operation is performed for the specified
length of time.
Select this setting to detect the document placed on the original
glass or loaded into the ADF, then automatically select paper of the
same size if "×1.0" is selected or select the paper size appropriate
for the specified zoom ratio.
Select this setting to automatically select the appropriate zoom ratio
after a document is placed on the original glass or loaded into the
ADF and the copy paper size is selected.
Set this function to copy the document with the light- and dark-
colored areas or the gradations of the image inversed.
Select this setting to print copies with the center (fold) of the docu-
ment erased.
Touch this button to specify a paper size not loaded in a paper tray
or to copy on paper other than plain paper.
Set this function to specify chapter title pages that must be printed
on the front side of the paper when printing double-sided copies.
Select a setting to arrange reduced copies of multiple document
pages on a single copy page. The settings for the number of pages
that can be combined are "2 in 1", "4 in 1" and "8 in 1".
Set this function to add paper from the specified paper tray to the
copies as a cover page.
Select a setting to adjust the density of the print image to one of nine
levels.
Set this function to erase unwanted areas from the document, such
as the shadows around the edges and the fold.
Appendix
200/250/350