Selecting Finishing For Copies - Konica Minolta bizhub 200 User Manual

3
3.10

Selecting finishing for copies

Various settings are available for sorting and finishing copies that are fed out.
Note
The factory default setting is "Non-Sort".
!
Detail
If no finisher is installed and the following conditions are met, printed
copies can be fed out and sorted/grouped in an alternating crisscross
pattern (crisscross sorting and crisscross grouping).
- Letter or 5-1/2 × 8-1/2 paper is used.
- Paper of the same size and type is loaded with the w orientation in one
paper tray and with the v orientation in another tray.
- The "Auto Paper Select" setting is selected.
- The "Mixed Original" setting is not selected.
- The "Cover Mode" and "Insert Sheet" functions are not set.
- The "Image Repeat" function is not set.
Select the "Booklet" function in the Book Copy/Repeat screen of the Ap-
plication screen when center binding ("Crease" and "2 Staples" settings)
is set.
3-50
Basic copy operation
200/250/350