Punching Holes In Copies (Punch Settings); To Punch Holes In Copies - Konica Minolta bizhub 200 User Manual

Basic copy operation
3
Touch [Position Setting],
and then select the de-
sired position.
– Touch [Auto] to auto-
matically determine
the binding position
according to the ori-
entation of the load-
ed document.
4
Touch [Enter].
The Finishing screen appears again.

Punching holes in copies (punch settings)

!
Detail
If a punch setting is to be selected, select the orientation in which the
document is positioned. If an Original Direction setting is not selected,
holes may not be punched in the copies as desired. For details on spec-
ifying the document orientation, refer to "Selecting the document orien-
tation (Original Direction settings)" on page 3-19.
When finisher is installed
Paper Weight
16 lb to 24 lb

To punch holes in copies

1
In the Basics screen,
touch [Finishing].
The Finishing screen ap-
pears.
200/250/350
Paper Size
11 × 17 w, Letter w/v
3
3-57