Specifying The "Enhance Security" Parameter - Konica Minolta bizhub 200 User Manual

11
Changed parameters
Temporary overwrite data
Cancel HDD Locking Password
!
Detail
For details on the password rules, refer to "Password rules" on
page 11-70.
For details on the access locks, refer to "Canceling an access lock ("Un-
lock" parameter)" on page 11-66.
For details on the changed network settings, refer to the User's Guide
[Network Scanner Operations].
For details on the changed box settings, refer to the User's Guide [Box
Operations].
For details on the changed fax settings, refer to the User's Guide [Fac-
simile Operations].
Note
The following software cannot be used when the enhanced security fea-
tures are applied.
HDD Backup Utility
HDD Twain
PageScope Box Operator
PageScope Data Administrator

Specifying the "Enhance Security" parameter

Settings can be specified to enhance security for using the machine.
0 In order to set "Enhance Security" to "ON", various conditions concern-
ing the settings must be met. For details, refer to "Before specifying the
"Enhance Security" parameter" on page 11-62.
1
Display the Admin. 2 screen, and then touch [Security Setting].
– For details on displaying the Admin. 2 screen, refer to "Displaying
the Administrator Management screen" on page 11-21.
The Security Setting screen appears.
11-64
Details of change
"Temporary overwrite data" is set to "ON".
The hard disk locking password setting can no longer be
changed.
Utility mode
200/250/350