Adding Engine Oil - KTM 690 SMC USA 2010 Owner's Manual

Motorcycle
Hide thumbs Also See for 690 SMC USA 2010:
Table of Contents

Advertisement

MAINTENANCE WORK ON CHASSIS AND ENGINE

Adding engine oil

9.87
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may result
in unconsciousness and/or death.
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
Start the engine and check that it is oil-tight.
Check the engine oil level. (
Remove the oil filler plug with O-ring
oil.
Engine oil (SAE 10W/60) (00062010035) (
Engine oil (SAE 10W/50) (
Info
For optimal performance of the engine oil, do not mix different types of engine
oil.
If appropriate, change the engine oil.
100209-10
Install and tighten the oil filler plug with O-ring
p. 145)
from the clutch cover and fill up with engine
p. 182)
p. 182)
.
152

Advertisement

Table of Contents
loading

This manual is also suitable for:

690 smc

Table of Contents