Adding Engine Oil - KTM 125 Duke 2013 Repair Manual

19 LUBRICATION SYSTEM
19.5

Adding engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
–
Remove the oil filler plug
engine oil.
Engine oil
After oil
change
approx.
B00773-11
–
Install and tighten the oil filler plug with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
–
–
Start the engine and check that it is oil-tight.
Finishing work
–
Fit the front spoiler. (
–
Check the engine oil level. (
Main work
–
Remove the oil filler plug
engine oil.
Engine oil (SAE 15W/50) (
Engine oil (SAE 10W/40) (
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
B00773-10
If appropriate, change the engine oil.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
–
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the engine oil level. (
with the O-ring from the clutch cover and fill up with
7
1.2 l (1.3 qt.)
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
p. 54)
p. 216)
with the O-ring from the clutch cover and fill up with
1
p. 268)
p. 268)
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
p. 216)
External temper- Engine oil
ature: 0... 50 °C (SAE 15W/50)
(32... 122 °F) ( p. 268)
External tempera- Engine oil
ture: −10... 40 °C
(SAE 10W/40)
(14... 104 °F) ( p. 268)
219