Table of Contents
Advertisement
SERVICE PLAN
Service schedule
8.1
Check that the electrical equipment is functioning correctly.
Read out the fault memory using the KTM diagnostics tool.
Change the engine oil and filter, clean the oil screens.
Check the front brake linings. (
Check the rear brake linings. (
Check the brake discs. (
p. 86)
Check the brake lines for damage and leakage.
Check the rear brake fluid level. (
Check the free travel of the foot brake lever. (
Lubricate the linkage of the rear wheel suspension.
Check that the shock absorber and fork are leak tight. If necessary and depending on use, service
the fork and shock absorber.
Check the swingarm bearing.
Check the wheel bearing for play.
Check the tire condition. (
Check the tire air pressure. (
Check the spoke tension. (
Check for rim run-out.
x
Check the chain, rear sprocket and engine sprocket. (
Check the chain tension. (
Grease all moving parts (e.g. side stand, hand lever, chain, ...) and check for smooth operation.
Clean the dust boots of the fork legs. (
x
p. 90)
p. 100)
p. 98)
p. 96)
x
x
x
p. 111)
p. 114)
p. 112)
p. 83)
p. 80)
p. 73)
x
(
p. 146)
K10N
K75A
K150A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
x
•
•
•
•
•
59
K300A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Advertisement
Table of Contents
