MAINTENANCE WORK ON CHASSIS AND ENGINE
Adjusting chain guide
x
9.29
Checking the brake discs
9.30
Warning
Danger of accidents Reduced braking efficiency due to worn brake disc(s).
–
Change the worn brake disc(s) without delay. (Your authorized KTM workshop will be glad to help.)
–
Remove screws
Condition
Number of teeth: ≤ 44 teeth
–
Insert nut
–
Mount and tighten screws
Guideline
Remaining screws, chassis
Condition
Number of teeth: ≥ 45 teeth
–
Insert nut
–
Mount and tighten screws
Guideline
Remaining screws, chassis
600635-10
and
. Take off the chain guide.
in hole
. Position the chain guide.
and
.
in hole
. Position the chain guide.
and
.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
86