Adding Engine Oil - KTM 250 EXC-F 2013 Owner's Manual

17 SERVICE WORK ON THE ENGINE
17.4

Adding engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
Info
Too little engine oil or poor-quality engine oil results in premature wear to
the engine.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
–
–
Start the engine and check that it is oil-tight.
Finishing work
(EXC‑F AUS, EXC-F SIX DAYS)
–
Install the engine guard. (
–
Check the engine oil level. (
–
Remove the oil filler plug
–
Add the same engine oil that was used when the motor was changed.
Engine oil (SAE 10W/50) (
Alternative 1
Engine oil (SAE 10W/60) (00062010035) (
Info
For optimal performance of the engine oil, do not mix different types of
101472-10
engine oil.
If appropriate, change the engine oil.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
–
–
Start the engine and check that it is oil-tight.
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
p. 68)
p. 96)
with the O-ring from the clutch cover.
1
p. 114)
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
p. 114)
99