Starting And Shutting Down The Projector - InFocus IN5212a User Manual

Starting and Shutting down the Projector

1.
Remove the lens cap.
2.
Connect the power cord to the
projector. Connect the other end to
a wall outlet. Verify that the AC
Power switch on the back of the unit
is turned on. When connected, the
PWR LED will turn solid Red.
3.
Turn on the lamp by pressing the
" " button on the rear of the
projector or the Power On button on
the remote.
The PWR LED will become solid
Green.
The startup screen will display in
approximately 30 seconds.
— 12 —