InFocus IN5212a User Manual page 39

3D Setting
I
TEM
3D
3D Sync Invert
3D Format
Note:
1. By default, the 3D OSD menu options will be grayed out until a 3D source is detected. When a 3D
source is detected, the menu options will become available.
2. Use 3D glasses to view a 3D image.
3. You need 3D content from a 3D DVD or 3D media file.
4. You need to enable the 3D source (some 3D DVD content may have a 3D On/Off selection feature).
5. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a
driver on your PC and connect a USB emitter.
6. Make sure to choose the 3D mode which matches the type of glasses you are using (DLP Link or IR
3D).
7. Power on the glasses. Glasses normally have a power On/Off switch.
Follow the configuration instructions which came with your glasses to finish the setup process.
Press ◄► to enter and select a different 3D mode.
Press ◄► to enter and enable or disable 3D Sync Invert.
Press ◄► to enter and enable or disable different 3D Formats.
D
ESCRIPTION
— 32 —