Advanced 1 Feature - InFocus IN5212a User Manual

Advanced 1 Feature

Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press
▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down
in the Advanced 1 menu. Press ◄► to enter and change values for setting.
I
TEM
Press ◄► to enter and select different OSD location.
Menu Position
Press ◄► to enter and select OSD background translucent level.
Translucent Menu
Press ◄► to enter and select Low Power Mode : Off, Low Power, On by Lan or VGA
Out Mode. Low Power mode uses less than 0.5W of power in standby mode and
Low Power Mode
disables LAN functionality. If you want to be able to turn on the projector via LAN and
use less than 6W of power in standby mode, choose On by LAN instead.
Press ◄► to enter and toggle between Normal and High fan speeds.
Fan Speed Note: We recommend selecting high speed in high temperatures, high humidity, or
high altitude (higher than 1500m/4921ft) areas.
After replacing the lamp, this item should be reset. See page
Lamp Hour Reset
on
Press ◄► to enter and adjust a two digit projector ID from 00 through 98.
Projector ID
Press
Network
Network
Press ◄► to enter and turn Video Overscan on or off.
Video Overscan
Lamp Hour Reset.
(Enter) / ► to enter the Network menu. See page
.
D
ESCRIPTION
— 36 —
37 for more information
37 for more information on