Starting And Shutting Down The Projector - InFocus IN134UST User Manual

Starting and Shutting down the Projector

Connect the power cord to the
1.
projector. Connect the other end to
a wall outlet.
2. Turn on the connected devices.
3. Ensure the POWER LED displays a
solid green. Then press the POWER
button
of the remote
projector.
The projector splash screen displays
and connected devices are
detected.
See Setting an Access Password
(Security Lock) on page 12 if
security lock is enabled.
If more than one input device is
4.
connected, press the SOURCE
button
of the remote
scroll among the devices.
(Component is supported using a
RGB to COMPONENT ADAPTER.)
5. When the "Power Off? Press Power
again" message appears, press the
POWER button. The projector turns
off.
Caution:
Do not unplug the power cord until the POWER LED changes to solid green–indicating the
projector has cooled down.
to turn on the
and use ▲▼ to




– 11 –
IN134UST/IN136UST User's Manual
VGA 1/VGA 2: Analog RGB
Component: DVD input YCbCr / YPbPr, or
HDTV input YPbPr via HD15 connector
Composite Video: Traditional composite video
HDMI: HDMI, DVI
S-Video: Super video (Y/C separated)