Installing Or Removing The Optional Lens; Removing The Existing Lens From The Projector - InFocus IN5212a User Manual

Installing or Removing the Optional Lens

Caution:

Do not shake or place excessive pressure on the projector or the lens components as the projector
and lens components contain precision parts.

Before removing or installing the lens, be sure to turn off the projector, wait until the cooling fans
stop, and turn off the main power switch.

Do not touch the lens surface when removing or installing the lens.

Keep fingerprints, dust or oil off the lens surface.

Do not scratch the lens surface.

Work on a level surface with a soft cloth under it to avoid scratching.

If you remove and store the lens, attach the lens cap to the projector to keep off dust and dirt.

Removing the Existing Lens From the Projector

1.
Push and release the top cover to
open as shown.
2.
Push the LENS RELEASE button to
the unlock position.
3.
Grasp the lens.
4.
Rotate the lens counterclockwise.
The existing lens will be
disengaged.
5.
Pull out the existing lens slowly.
— 10 —