SP8604 User's Manual
Starting and Shutting down the Projector
Starting the projector
1.
Remove the lens cap.
2.
Securely connect the power cord and
signal cable. When connected, the pow-
er LED will turn red.
3.
Turn on the lamp by pressing "
button on the rear of the projector or
"
" on the remote control.
The READY LED will now flash red.
The startup screen will display in ap-
proximately 30 seconds. The first time
you use the projector, you can select
your preferred language from quick
menu after the startup screen display.
4.
"
– 14 –