Scanner And Left-Margin Calibration - Olivetti PR2 Service Manual

4.6.9 SCANNER AND LEFT-MARGIN CALIBRATION

Proceed as follows to make this adjustment:
1. Power on the printer with its cover open and while holding down the three console keys.
2. Wait for an acoustic signal to indicate that the printer has switched into the adjustment mode and
close the cover.
3. Press the "Station 2" key.
4. Insert an A4 sheet of paper at least 230 mm wide and align it to the left.
5. If the calibration procedure is not successful, press the "Station 2" key to enter the default value;
the sheet is ejected and the system will return to the main menu.
6. Repeat the procedure from step 1.
683311W
COVER OPEN
MACHINE POWERED ON
LED STATION 2 ON
INSERT AN A4 SHEET, 80g
minimum 230 wide, and align to
the LEFT
YES
CALIBR.
NOT OK?
NO
CALIBRATION OK
SHEET EJECTED
Service Manual
READY
LOCAL
Press the STATION2 button
STATION1
flashing
RETURN TO THE MENU
to enter the default value
SHEET EJECTION
4-47