Hardware Installation
HARDWARE INSTALLATION
Congratulations on your purchase of SY-P4I875P DRAGON 2 Motherboard.
You are about to install and connect your new Motherboard.
Note: Do not unpack the Motherboard from its protective
anti-static packaging until you have made the following
preparations.
2-1 PREPARATIONS
Gather and prepare all the following hardware equipment to complete the
installation successfully:
1.
Socket mPGA478 processor with CPU cooling fan. (CPUs with a
VCORE higher than 1.6 volts are not supported)
2.
DDR memory module(s)
3.
A computer case with an adequate power supply unit (350W for a
minimally loaded system or 400W for a fully loaded system).
4.
Monitor
5.
Keyboard
6.
Pointing Device (mouse)
7.
Disk Drives: HDD, CD-ROM, Floppy drive...
8.
External Peripherals: Printer and Modem (optional)
9.
VGA Card (AGP or PCI)
Note: This M/B only supports 1.5V AGP VGA cards! 3.3V AGP cards
are not supported !
Chapter 2
19
SY-P4I875P DRAGON 2