SOYO SY-P4I875P DRAGON 2 User Manual page 139

3. Install the audio driver supplied on our driver disc.
4. Check BIOS setup if "onboard audio" is enabled.
5. If sound is already installed, check our website for an audio
driver update.
The sound is working in my system, but when I play CD music
from the CD-ROM, I do not get any sound. What is wrong?
This is because the 4-wire audio cable from the CD-ROM to the
on-board CDIN connector or AUX connector on the M/B is not
connected. See manual for location of CDIN.
The sound and everything else works fine except that the line-in
and/or microphone doesn't work. What is wrong?
1. Please go to sound properties and check if the line-in and/or
microphone are enabled.
2. Check if the Microphone/line-in device is ok.
3. If you use the 4-channel option and you are connection your
PC (not via the SPDIF card), line–in will be disabled.
Line-in works normally when using the SPDIF card for
speaker connections in 4-channel mode.
Added PCI Audio Card does not work on this motherboard.
1. Go to SOYO COMBO Setup and Disable "onboard audio".
2. Go to integrated peripherals and Disable "Game port
address" and "Midi port address"
Hard disk/FDD/ CD-ROM issues
My Western digital HDD is not detected during boot-up
Change the jumper settings to cable select or single.
Sometimes the system finds my CD-ROM, sometimes not
1. Check CD-ROM if it is working properly.
2. The power supply might not have enough wattage to support
all the peripherals. If your system has other peripherals
139