SOYO SY-P4I875P DRAGON 2 User Manual page 110

Highpoint HPT372 Driver Installation
Installing HPT 372 during OS Installation
Install driver during Windows XP installation
Go to "d:\raid\hpt372\" directory, (assuming that your
1.
CD-ROM is drive d) copy all the files and directory to a floppy
disk.
2. Windows XP will start to inspect your hardware configuration
3. Press "F6" when the message "Press F6 if you need to install a third
party SCSI or RAID driver...." Appear. Below the screen
4. Press S key to specify additional devices when the Windows XP
Setup window appears.
5. Insert the floppy disk of driver, then press Enter to continue
6. In the follow-on window of device type, please select
" HPT3xx/ICH5/Sil controller for Win XP" to continue
7. Win XP will prompt you that a message that the driver is newer than
the default driver, press S (use the driver on floppy) to continue
8. The follow-on interface will list the devices to be installed, in which
" HPT3xx/ICH5/Sil controller for Win XP" item should be
included. (If users want to install other devices, press "S" at this
time.) Press ENTER to continue Windows XP setup.
Install driver during Windows 2000 installation
1. Go to "d:\raid\hpt372\" directory, (assuming that your
CD-ROM is drive d) copy all the files and directory to a floppy
disk.
2. Windows XP will start to inspect your hardware configuration
3. Press "F6" when the message "Press F6 if you need to install a third
party SCSI or RAID driver...." Appear.
4. Press S key to specify additional devices when the Windows 2000
Setup window appears.
SY-P4I875P DRAGON 2
110