SOYO SY-P4I875P DRAGON 2 User Manual page 136

3. Check the specification of the memory module, maybe the
M/B does not support it.
4. Go to BIOS setup and load fail safe settings. Please check if
the system performance in the BIOS setup is set to
Turbo/Maximum. Set it to normal if so.
5. Check the website for latest BIOS update.
6. Check the website for FAQ's regarding instability issues.
7. Change the memory module or CPU, they might be
defective.
8. The power supply might not have enough wattage to support
all the peripherals. If your system has other peripherals
connected, like CD-RW, extra HDD, etc. disconnect them.
And see if the problem is gone then.
9. Install Intel Inf driver.
10. Check if your mainboard is shorting out against the case.
11. Check if your memory module timings set in CMOS setup
are supported by your memory module.
My system intermittently locks up, during Windows installation.
1. Go to BIOS and load the optimized defaults.
2. Check our website for any BIOS updates.
3. If it still has the problem, remove all other add-on cards
except CPU (and CPU Fan)/ Memory/ Video card/Hard disk.
See if you can finish Windows installation. Then put
peripherals in one by one to identify which one causes the
lockup.
136