SOYO SY-P4I875P DRAGON 2 User Manual page 138

Mpga socket 478 processor supported intel 875p agp/pci 533/800 mhz front side bus supported atx form factor
Hide thumbs Also See for SY-P4I875P DRAGON 2:
Table of Contents

Advertisement

2. The BIOS chip is defective due to an unsuccessful flash,
contact your nearest SOYO branch for re-flashing.
Is there a way to reprogram my BIOS after an unsuccessful
flash?
No other way, you need to send back the BIOS ROM to your nearest
SOYO branch for re-flashing.
I'm using a 400 or 533 MHz FSB CPU, I cannot find the DDR
200MHz option in the BIOS, why?
An 800 MHz CPU should be used if you want your memory to run at
DDR 400 (PC3200).
VGA Issue
I cannot set my VGA to go higher than 16 color (640x 480).
1. Make sure that you have installed the Intel Inf driver.
2. Install/ re-install the VGA driver.
After wake-up from Suspend to RAM or Standby mode, the
screen has no display but I can hear the hard disk operating
Check the VGA card manufacturer for a driver update and VGA
BIOS update, make sure the VGA card supports the Suspend to Ram
function.
Audio Issue
How can I disable the on-board Audio?
Go to the SOYO Combo Feature menu in the BIOS setup, then set the
"onboard audio" to disable.
I cannot get the sound working on my system.
1. Check if the speaker wire is connected to the line out
connector on the M/B. Make sure the SPDIF card cable isn't
connected the wrong way around.
2. Check if your speakers are powered on.
138

Advertisement

Table of Contents
loading

Table of Contents