SOYO SY-P4I875P DRAGON 2 User Manual page 135

When I boot up my system, everything works fine, it sees my
CPU and memory, detects my hard drive, floppy drive and
CD-ROM but locks up at "Verify DMI pool data... "it doesn't go
any further. What should I do?
1. Clear the CMOS ram. (JP5 connector, see the manual for
more info on how to clear the CMOS).
2. If it still has the problem, remove all other add-on cards
except the video card see if it boots further. Then put
peripherals in one by one to identify which one causes the
lockup.
3. Change the CPU.
During Boot-up, my computer says CMOS memory Checksum
error. What is the problem? This error occurs if you:
1. Clear CMOS memory.
2. Redo your CMOS setup settings. If your battery is empty the
error will occur more frequently. You will need to replace
the battery in this case. If the problem persists, re-flash the
BIOS. If all fails your BIOS chip is failing and needs to be
replaced.
3. Change the CMOS battery.
4. Re-flash BIOS.
5. The BIOS chip might be failing.
Stability Issues
My system intermittently locks up, very unstable.
1. Check the CPU Temp, it might be overheating. Change the
CPU FAN. (Check in the health monitor setup menu what
your CPU temperature is)
2. Do not overclock your CPU
135