SOYO SY-P4I875P DRAGON 2 User Manual page 124

VI. Set Disk Mode
The following steps shall be taken to set the disk mode.
1.
Select 6. Set Disk Mode
2.
Select the disk mode to be set in the popup selection box and press
Enter to confirm.
VII. Set Boot Disk.
The following steps shall be taken to set the boot disk:
1.
In the menu, select
2.
In the validated channel status zone, use the arrow key to select the
boot device and press
Note:
1. The Set Boot Disk
connected to IDE on motherboard.
2. After the boot disk is set, its status will become
in the menu and press
7. Set Boot Disk
Enter to confirm.
item appears on condition that no hard disk is
124
Enter
item, press Enter
Boot .
to confirm.
to confirm.