Setting The Time; Setting The Date - Polar Electro Vantage NV User Manual

Setting the time

AM/PM (alternatively the first two digits) are flashing.
1. Press SIGNAL/LIGHT to select AM or PM.
2. Press STORE/LAP/RECOVERY to lock your
selection.
The first two digits, representing the hours,
start flashing.
3. Press SIGNAL/LIGHT to select the desired
hour.
4. Press STORE/LAP/RECOVERY to lock your
selection.
The next two digits, representing the minutes,
start flashing.
The last two digits representing the seconds go to zero.
5. Press SIGNAL/LIGHT to select the desired minutes.
6. Press STORE/LAP/RECOVERY to lock your selection.
7. Press SET/START/STOP to enter the date setting mode.
The seconds start running.
The two first digits of date, representing the year, start flashing.
8. Now continue from Setting the date.
To return to time of day display immediately, press the
SELECT button twice.

Setting the date

The first two digits are flashing.
1. Press SIGNAL/LIGHT to select the year.
2. Press STORE/LAP/RECOVERY to lock your
selection.
The second digits, representing the month,
start flashing.
10
3. Press SIGNAL/LIGHT to select the month.
4. Press STORE/LAP/RECOVERY to lock your selection.
The last two digits, representing the day, start flashing.
5. Press SIGNAL/LIGHT to select the desired day.
6. Press STORE/LAP/RECOVERY to lock your selection.
The digits in the lower right corner, representing the weekdays,
start flashing.
7. Press SIGNAL/LIGHT to select the desired weekday.
8. Press STORE/LAP/RECOVERY to lock your selection.
The two digits, representing the year, start flashing.
9. Press SET/START/STOP to enter the alarm setting mode. Press
the SELECT button to return to the time of day display.
11