How Does The Polar Vantage Nv Work; Polar Vantage Nv Parts; Wearing The Polar Vantage Nv - Polar Electro Vantage NV User Manual

HOW DOES POLAR
VANTAGE NV WORK

Polar Vantage NV parts

The Polar Vantage NV HRM consists of three parts:
2. The
Elastic
Strap
3. The Wrist Receiver
6
1. The Polar Coded
Transmitter
Grooved
electrode
areas
Wearing the Polar Vantage NV HRM
1. Attach the Polar Coded Transmitter to the elastic strap.
2. Adjust the strap length to fit snugly and comfortably.
3. Wet the grooved electrode areas on the backside of the Polar
Coded Transmitter.
The key to flawless operation is to wet the grooved electrode areas
carefully.
4. Secure the strap around your chest, below the
breasts. Lock the buckle.
5. Check that the grooved and wet elec-
trode areas are against your skin and the
Polar logo is in a central upright position.
6. Put on the Receiver as you would put
on an ordinary watch.
It is important that the electrodes are wet during
the exercise. However, after exercising, wash and dry the Transmitter
carefully to save the electrodes and battery life.
It is recommended that you wear
the Transmitter against your
bare skin to ensure flawless
operation. However, if you
wish to wear the Transmit-
ter over a shirt, moisten
the shirt well under the elec-
trodes.
7