Setting The Time Display; Setting The Relaxation/Lap Display; Setting The Memory Deletion - Polar Electro Vantage NV User Manual

Setting the Time Display

00:00.0 (alternatively time of day) is flashing.
1. Press SIGNAL/LIGHT to select the desired
Time Display.
CHOOSE FROM THESE ALTERNATIVES:
00:00.0 Displays stopwatch time during
heart rate measurement.
Time of Day Displays time of day during
heart rate measurement.
2. Press SET/START/STOP to enter the setting of the
Relaxation/Lap Display.
DISP 2 appears on the display.
The ninth block of the graphic bar on the right,
representing the setting of the Relaxation/Lap Display ,
starts to flash.
RLX (alternatively RLX/LAP or LAP) starts to flash.

Setting the Relaxation/Lap Display

RLX (alternatively RLX/LAP or LAP) is flashing.
1. Press SIGNAL/LIGHT to select the desired
Relaxation/Lap Display.
CHOOSE FROM THESE ALTERNATIVES:
RLX During heart rate measurement
graphic and numeric display indicat-
ing Relaxation Rate is shown when no
lap time is taken. Shows lap number for
5 seconds after each LAP press. (See
Polar Glossary for more information about
Relaxation Rate).
LAP Displays lap number all the time.
RLX/LAP During heart rate measurement scans
5 seconds lap number and 5 seconds
Relaxation Rate.
18
2. Press SET/START/STOP to enter the setting of the Memory Deletion
DEL FILES appears on the display.
The last block of the graphic bar on the right, representing the
setting of the Memory Deletion , starts to flash.
NO (alternatively YE) strats to flash.

Setting the Memory Deletion

NO (alternatively YE) is flashing.
1. Press SIGNAL/LIGHT to select the desired
option.
CHOOSE FROM THESE ALTERNATIVES:
NO With this selection, when the memory
is getting full, the oldest file is not
deleted and you can not save more
information. To continue saving more
training information you have to delete
files manually. (See Deleting the most
recent file)
YE With this selection, when the memory is
getting full during exercise, the oldest file is
deleted automatically to free some memory
for the current file. However, if the current recording is
consuming the whole memory into one single file,
the stopwatch stops but the file will not be deleted.
2. Press SELECT to return to the beginning of the SET mode.
The uppermost block of the graphic bar starts to flash.
TIME 1 appears in the display.
Press SELECT to return to Time of Day mode.
19