Table of Contents
Advertisement
nction by
eded until
Then follow
he watch?
Choose from the following two alternatives to continue:
OP to
1. To set the time of day, press SET/START/STOP.
Continue from Setting the time of day.
a button while
2. To return to the Time of day display, press SELECT.
If you are in the Time of day display, press SET/START/STOP twice.
1. Press SIGNAL/LIGHT to select AM or PM.
2. Press STORE/LAP/RECOVERY to confirm your selection.
GNAL/LIGHT.
3. Press SIGNAL/LIGHT to select the desired hour.
e.
4. Press STORE/LAP/RECOVERY to confirm your selection.
5. Press SIGNAL/LIGHT to select the desired minute.
6. Press STORE/LAP/RECOVERY to confirm your selection.
When the alarm is turned ON you will see
Time of day display.
When the alarm comes on it will sound for one minute or you can
turn it off by pressing STORE/LAP/RECOVERY.
TIME is displayed.
AM (alternatively the hours) is flashing.
How to turn the alarm ON or OFF in the Time of day display:
1. Press and hold SIGNAL/LIGHT. Release.
ALARM, alarm time and ON or OFF are displayed for a couple
of seconds.
The displayed alternative (ON or OFF) will be saved and the
display automatically returns to show the time of day.
SETTING THE TIME
TIME is displayed.
AM (alternatively the hours) is flashing.
The hours are flashing.
The minutes are flashing.
The seconds go to zero.
The seconds start running.
AM or PM or the hours are flashing.
22.1.1999, 08:39
in the
11
Advertisement
Table of Contents
