Installing The Printer Driver; Install Using A Usb Connection - DataCard RP90 Plus E Hardware And Driver Installation Manual

Installing the Printer Driver

Do not connect the printer data cables or power on the printer until directed to do so.
You can install the printer in one of the following ways:
•
Using a USB connection. See
•
Using a Network connection. See
page
•
•
Sharing a printer over a network. See
Connection" on page 32
You can also install the Status Monitor. See

Install using a USB connection

1.
Start the Windows
in as a user with Administrator permissions.
2.
Insert the RP90 Plus E Support CD-ROM in
the PC drive.
3.
On Windows Vista, a User Account Control
dialog might appear. Click Allow to continue.
4.
When the opening window is displayed,
choose Install the Printer.
5.
Choose Install the RP90 Plus E Driver.
6.
On Windows Vista, click "Allow" on the
Security dialog box and then click "Continue" on the User Account Control Dialog.
RP90 Plus E Card Printer Installation Manual
22.
If you need to assign a different printer name, set up IPSec security, set IP
addresses from the PC, you need to follow different procedures. See
Network Installation" on page 18
®
XP, Windows 2000 or Windows Vista
"Install using a USB connection" on page
"Install using a Network connection" on
for details.
"Sharing a Printer on a Network
"Installing the Status Monitor" on page
9.
"About
30.
®
operating system and log
9