Install Using A Network Connection - DataCard RP90 Plus E Hardware And Driver Installation Manual

9.
Use the printer LCD panel to set IPSec Type to Preshared Key.
10.
Install the printer using a USB connection and install the Status Monitor. See
using a USB connection" on page 9
page 30
11.
Open the Status Monitor as an administrator. See the Open the Status Monitor section
in the User Guide.
12.
Click the Printer Select tab. It shows the Security settings chosen on the printer in
steps 8 and 9 above. Do the following:
A.
B.
C.
D.
E.
13.
Remove the USB cable connecting the printer and PC.
14.
Install the printer using a LAN connection See
on page

Install using a Network connection

If your network administrator will assign the network address to the printer, obtain the network
address before beginning this procedure.
1.
Install printer supplies and power on the printer. See Using the Printer in the User
Guide to install supplies and power on the printer.
2.
Connect the Ethernet able to the network and to the printer. See
Data Cable" on page 8
3.
Set Network > Host Interface to LAN, as described in the Printer LCD Panel section
of the User Guide.
4.
If you will use DHCP addressing, choose On for Network > DHCP, as described in the
Printer LCD Panel section of the User Guide.
5.
If you are using static addressing, set Network > DHCP to Off. Set the IP address
using the LCD panel, as described in
page
6.
After saving settings, power the printer off, wait a minute, and then power the printer
on.
7.
If you set DHCP to On, view the network address, as described in the Printer LCD
Panel section of the User Guide.
8.
Start the Windows
in as a user with Administrator permissions.
22
for the steps to follow.
Click Details. The IPSec Setting dialog box opens.
Choose Preshared Key from the Download Type list.
Click Select. The Select Certificate Download File dialog box opens.
Browse to the location of the key file from step 1.
Select the file and then click Write. The Status Monitor sends the file to
the printer.
22.
for the steps to follow.
18.
®
XP, Windows 2000 or Windows Vista
and "Installing the Status Monitor" on
"Install using a Network connection"
"Setting Network Address Values" on
®
operating system and log
Installing the Printer Driver
"Install
"Connecting the