DataCard RP90 Plus E Hardware And Driver Installation Manual page 24

C.
D.
E.
F.
9.
Remove the USB cable connecting the printer and PC.
10.
Install the printer using a LAN connection See
on page
IP Security Using a Preshared Key
To use IPSec security with a Preshared Key, create a key file and then define it to the PC.
Tips for success
•
Each PC that uses the printer must use the shared key to use the printer after
IPSec security has been set up.
•
After IPSec security is set up on the printer, the IPSec Mode and IPSec Type
values on the printer LCD panel are view-only settings.
•
For more information about IPSec security, search Windows help for "IPSEC."
To set up IPSec security using a Preshared Key, do the following:
1.
Create a key.
A.
B.
C.
D.
2.
Open the Management Console by choosing Start > Run. Type mmc in the Run dialog
and click OK.
3.
Start IP Security Policy Management. This choice is available after IP security has
been set up on the PC.
4.
Open the "Edit Authentication Method Properties" dialog box for the policy.
5.
Choose "Use this string:" and enter the key from step 1.
6.
Click OK to save the value and close the dialog box.
7.
Power on the printer. For best results, do not send any cards to print.
8.
Use the printer LCD panel to set IPSec Mode to ON. See the Printer LCD Panel
section of the User Guide.
RP90 Plus E Card Printer Installation Manual
Click Select. The Select Certificate Download File dialog box opens.
Browse to the location of the Printer Certificate or CA Certificate.
Select the file and then click Write. The Status Monitor sends the file to
the printer.
Repeat steps B through E for the second file (Printer Certificate or CA
Certificate, which ever was not downloaded in step d) to download.
22.
Using an application such as Notepad, create a text file for the key.
Allowed characters are upper and lower case letters (A-Z), numerals (0-
9), and the special characters hyphen(-), underscore (_), open and close
parentheses(), period (.), comma (,), and the at symbol (@).
The key can be up to 255 characters long.
Save the file with an extension of ".key".
"Install using a Network connection"
21