DataCard RP90 Plus E Hardware And Driver Installation Manual page 32

26.
The last page of the wizard appears. Click Finish. You can leave the CD-ROM in the
PC drive.
27.
Check to make sure that the new printer appears in the Printers or Printers and Faxes
window.
28.
Installation of the printer driver is now complete.
Continue with installing the status monitor.
After installing the driver and optional Status Monitor, you can install the optional Datacard
Software plug-in for the RP90 Plus E Printer.
If you want to delete the printer, restart Windows and then follow the steps in
"Removing the Printer Driver" on page
RP90 Plus E Card Printer Installation Manual
37.
®
ID
29