DataCard RP90 Plus E Hardware And Driver Installation Manual page 20

25.
The following dialog box might appear in the background. Click Finish to close it.
26.
Check to make sure that the new printer appears in the Printers and Faxes window.
27.
Installation of the printer driver is now complete.
Continue with installing the Status Monitor. See
After installing the driver and optional Status Monitor, you can install the optional Datacard
Software plug-in for the RP90 Plus E Printer.
If you want to delete the printer, restart Windows and then follow the steps in
"Removing the Printer Driver" on page
RP90 Plus E Card Printer Installation Manual
"Installing the Status Monitor" on page
37.
30.
®
ID
17