DataCard RP90 Plus E Hardware And Driver Installation Manual page 14

11.
Select the Printer model from the table. If this is the first RP90 Plus E printer installed
on this PC, the default printer is "Datacard RP90 Plus E U1." For best results, use the
printer name shown.
•
•
Unit No. Setting in
Printer LCD Panel
12.
Check the Make this the default printer box if you plan to use only this printer from
this PC. Click Next.
RP90 Plus E Card Printer Installation Manual
"U1" is the unit number, and it must match the USB port you create and the "Unit
No." setting described in the Printer LCD Panel section of the User Guide.
If this is not U1, set the unit number of the printer now, as described in the Printer
LCD Panel section of the User Guide. Then, continue with installation.
Printer Model of This Dialog
1 (Default)
2
3
4
5
6
Unit No. 7
Box
Datacard RP90 Plus E U1
Datacard RP90 Plus EU2
Datacard RP90 Plus EU3
Datacard RP90 Plus E U4
Datacard RP90 Plus E U5
Datacard RP90 Plus E U6
Datacard RP90 Plus E U7
USB Port
RP90 Plus E U1
RP90 Plus E U2
RP90 Plus E U3
RP90 Plus E U4
RP90 Plus E U5
RP90 Plus E U6
RP90 Plus E U7
11